- Joined
- Jan 8, 2011
- Messages
- 5
- Motherboard
- OS X 10.8
- CPU
- 1st gen i7 560
- Graphics
- 5770 ATI
- Mac
- Classic Mac
- Mobile Phone
isisyodin said:FEROX said:I guess Ill exchange it. Could you post a newegg link for the card and outline the procedure to run baboon or post a link for the procedure? Thanks for the info
Yeap no problem.
Files you'll need:
-DSDT for your board (Tonymac DSDT database) with HDMI video and audio edits. Check this post to update your DSDT for HDMI video and audio support:
viewtopic.php?p=54238&sid=76e63adf4079f39f8189a7687e9b0fed#p54238
To determine the PEGP address of your GFX card check this post:
http://www.insanelymac.com/forum/index. ... &p=1613648
-OSX 10.6.5 or 10.6.6 combo from Apple's website
-iBoot
-Multibeast
-com.apple.Boot.plist and smbios.plist attached. You may have to modify them slightly.
-Realtec KEXT from linx2mac: https://docs.google.com/uc?id=0B2RpaAfD ... jroB&hl=en
Here are the steps:
-Use iBoot to get OSX 10.6 installed
-Update to 10.6.5 or 10.6.6 thru a combo update do not reboot
-Use Multibeast->Drivers and Bootloaders to install fakesmc, JMicron36xSATA.kext, Chameleon 2.0 RC5 -ATI with Kabyl
-Paste plists and DSDT to your Extra folder
-Use Multibeast and run System Utilities
-Run linx2mac kext installer
-Reboot. If it does not reboot, force a shutdown and start up your PC.
Note: if you are still using the HIS 5770 at the Chameleon boot up, use:
AtiConfig=Uakari. The bootplist attached enables frame buffer Baboon but the previous command at Chameleon bootup overrides the boot.plist entry.
You can try other frame buffers with this command; also, if you look at the bottom of the post you'll find the cards I have tested. Newegg has a special on the Sapphire this week. Check my post http://www.insanelymac.com/forum/index. ... &p=1614365
Good Luck
I tried all the primate frame buffers with no success. The link in the link you posted just goes to Sapphire's website, not a specific card...