[Guide] ASUS ZENBOOK UX32LN. Fully working.

[Wurlitzer-1]

Thanks a lot, I will test with your suggestions.
Bought a BCM94352HMB Wifi/BT card but it's taking forever to arrive.

 

[Wurlitzer-1]

Your stability issue is likely caused by USB WiFi. Install supported PCIe WiFi instead.

That was it. Haven't had a single random reboot since I removed the USB WiFi dongle (RTL8188EU based TL-WN725N). Thank you!

One more question:
I used AppleHDA patcher to make sound work, which generated aDummyHDA.kext to be installed into /S/L/E. Works fine.
However I'm struggling with HDMI-audio. I tried to follow the instructions about HDMI-audio for Haswell described here: http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Could you give me a hand with this?


$ kextstat|grep -y acpiplat
13 2 0xffffff7f82380000 0x66000 0x66000 com.apple.driver.AppleACPIPlatform (4.0) 295F7A91-2DF7-3FFE-9550-A0C1A6F9D575 <12 11 7 6 5 4 3 1>

$ kextstat|grep -y appleintelcpu
outputs nothing

$ kextstat|grep -y applelpc
89 0 0xffffff7f81fef000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) 0C90B22D-637B-3000-8C44-B7955D57E10A <80 12 5 4 3>

$ sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext aDummyHDA.kext

View attachment wurlitzer-1.ioreg
View attachment patchmatic-extract.zip
View attachment CLOVER.zip

 

[RehabMan]

That was it. Haven't had a single random reboot since I removed the USB WiFi dongle. Thank you!

One more question:
I used AppleHDA patcher to make sound work, which generated aDummyHDA.kext to be installed into /S/L/E. Works fine.
However I'm struggling with HDMI-audio. I tried to follow the instructions about HDMI-audio for Haswell described here: http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Could you give me a hand with this?


$ kextstat|grep -y acpiplat
13 2 0xffffff7f82380000 0x66000 0x66000 com.apple.driver.AppleACPIPlatform (4.0) 295F7A91-2DF7-3FFE-9550-A0C1A6F9D575 <12 11 7 6 5 4 3 1>

$ kextstat|grep -y appleintelcpu
outputs nothing

$ kextstat|grep -y applelpc
89 0 0xffffff7f81fef000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) 0C90B22D-637B-3000-8C44-B7955D57E10A <80 12 5 4 3>

$ sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext aDummyHDA.kext

View attachment 172642
View attachment 172643
View attachment 172644

The layout-id on HDAU must match the layout-id on HDEF. You have 12 on HDAU and 3 on HDEF.

 

[Wurlitzer-1]

The layout-id on HDAU must match the layout-id on HDEF. You have 12 on HDAU and 3 on HDEF.

Spot on as usual!

 

[pavholm]

battery life time in comparison with Windows changed?

 

[f13sh]

Hello! Thanks! how to fix audio device ? kext VoodooHDA.kext not work. Device not found.

 

[RehabMan]

Hello! Thanks! how to fix audio device ? kext VoodooHDA.kext not work. Device not found.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[georggeorg]

I would like to thank you for your very helpful guide!
It serves me to change a second-hand Zenbook UX32LN with WIN 8.1 to a Yosemite / WIN7-Notebook. Very helpful were also the three attachments.
Until now, the only remaining topic is the Appleshop, as I don't have a built in Ethernet-Interface. Here I have to look for another solution.
In Yosemite, I use for the network the USB-Ethernet-Adapter or the D-Link AW-171 USB WLAN Adapter - for both exist installable drivers for mac. With WIN7, I use the built in Wlan adapter or the USB-LAN-Adapter.
My 500GB-SSD has 3 Data Partitions: one for Yosemite, one for WIN7 and the biggest formatted with NTFS for the Datas for both systems. I bought the Paragon NTFS-Driver for Yosemite - no problem to access the NTFS-Data. Until now I don't have any experiences with battery life, crashes or so - I just finished the installation. But I look forward to work with this notebook!
Georg

Meanwile I have updated to 10.11.6. It seems to me more stable. Until now, the only problem is the USB interface (only USB 3) and the Keyboard (cannot change to an apple laptop layout).

 

[RehabMan]

Until now, the only remaining topic is the Appleshop, as I don't have a built in Ethernet-Interface. Here I have to look for another solution.

https://github.com/RehabMan/OS-X-Null-Ethernet

 

[georggeorg]

Thank you for your help. I just have a problem with a compiler error. May I ask you for help? I market the error containing line with red.
Thank you vrry much. Georg