- Joined
- Feb 13, 2013
- Messages
- 3
- Motherboard
- ASUS Prime Z490P
- CPU
- i5 10600K
- Graphics
- UHD 630
Solved in Sierra 10.12.6!!
I have been using the post of jpalgron1
Is this:
" - Installation from usb drive:
Clover EFI (legacy mode) with nv_disable=1 & no Nvidia drivers injected (if not, hard reboot when injection):
Installation OK but screen is low resolution 1024x768
Next installing Clover EFI (legacy mode) on hard drive same params & change with Clover Configurator to iMac12.1
- first boot on HD:
OK in low résolution (Gforce GTX 550 is recognized, but no kext installed)
- post install:
Nvidia web drivers installed and activated
Changing EFI config.plist to "nv_disable=0"
- reboot:
OK:
screen recognized and hight resolution, BUT many bugs on the screen (a lot of black pixels on the desktop & windows)
So turning Off Nvidia web drivers in Configuration Panel, back to Apple nvidia drivers & changing EFI config.plist to "inject Nvidia drivers=yes" & always "nv_disable=0"
- reboot:
all is OK for now!
High resolution, no bugs, Geforce GTX 550 is recognized in system informations, Quartz & OpenGL working, Cuda working
Hope it will help you"
In my case:
1.- I used the kext "lilu" and "NvidiaFixUp" into clover/EFI/kext/others to get HD with glitches.
2.- Final config of config.plist: nv_disable=0, uncheck Nvidia web drivers and check inject Nvidia.
I have been using the post of jpalgron1
Is this:
" - Installation from usb drive:
Clover EFI (legacy mode) with nv_disable=1 & no Nvidia drivers injected (if not, hard reboot when injection):
Installation OK but screen is low resolution 1024x768
Next installing Clover EFI (legacy mode) on hard drive same params & change with Clover Configurator to iMac12.1
- first boot on HD:
OK in low résolution (Gforce GTX 550 is recognized, but no kext installed)
- post install:
Nvidia web drivers installed and activated
Changing EFI config.plist to "nv_disable=0"
- reboot:
OK:
screen recognized and hight resolution, BUT many bugs on the screen (a lot of black pixels on the desktop & windows)
So turning Off Nvidia web drivers in Configuration Panel, back to Apple nvidia drivers & changing EFI config.plist to "inject Nvidia drivers=yes" & always "nv_disable=0"
- reboot:
all is OK for now!
High resolution, no bugs, Geforce GTX 550 is recognized in system informations, Quartz & OpenGL working, Cuda working
Hope it will help you"
In my case:
1.- I used the kext "lilu" and "NvidiaFixUp" into clover/EFI/kext/others to get HD with glitches.
2.- Final config of config.plist: nv_disable=0, uncheck Nvidia web drivers and check inject Nvidia.