Contribute
Register

supermicro

  1. Jimzamjimmyy

    Hackintosh on Supermicro X9DRi-LN4F+ not booting

    Hello! I am trying to install macos mojave on my pc but it gets stuck before the installer opens. The guide I am using: https://www.tonymacx86.com/threads/unibeast-install-macos-sierra-on-any-supported-intel-based-pc.200564/ I didn't find CFG-Lock, Secure Boot Mode or OS type in my bios so...
  2. negru13

    Cannot install Sierra on Supermicro X10dai with nVidia 1080 ti OC

    I am trying for the past 2 days to install macOS Sierra on my PC but no matter what, I get kernel panic when I try to launch the installer. This is my CLOVER folder: Clover.zip This is my: config.plist The boot Args are: -v dart=0 npci=0x2000 nv_disable=1 kext-dev-mode=1 No graphics injectors...
  3. mustardntoast

    BIOS Settings

    I've tried changing the settings based on different instructions and I keep getting into a corner where I have to manually reset my MOBO. I am hoping that on of you can hold my hand through the process. The imgur gallery shows every BIOS setting that there is. In the first image you can see all...
  4. big.dog101

    My SuperMicro X9DAi restarts every time I try to start OSX install.

    I am using boot args: -v nv_disable=1. Specs: 2x Quad core intel xeon 16GB DDR3 1600 RAM 1TB HDD temporary nvidia ION graphics card
  5. drftclb

    Having some issues, just want to check compatibility

    Ayo, I'm just looking to check compatibility, I'm very new to this and have had quite the struggle getting Clover to show the installer. My build is as follows: Supermicro x8DTi-F 2x Intel Xeon x5670 40GB DDR3 ECC RAM RX480 8GB I am attempting to install on a 750GB Hitachi drive running in...
  6. scrolljam

    I want to help my best friend build a hackintosh for music

    Hello everybody! My friend is planning to buy Supermicro C7Z170-SQ motherboard, Intel core i7-7700 Processor, power supply Supermicro PWS-665-PQ, GT 1030 Low Profile 2Gb of memory and 2 sticks of ram memory by Supermicro 2x 8GB DDR4-2400 1RX8 NON-ECC UDIMM. Does anyone knows if this...
  7. HJRR

    Supermicro X7DCU NetScaler MPX 5500 project

    With almost no tweeks I got El Capitan to run on the MPX 5500 hardware (video here ) the next step was to get accelerated graphics. I am using a APPLE ROM PNY-brand GT120 which works great in my 2008 xServe server. Just had to enable PCI x16 ROM and make it MASTER and disable onboard video in...
  8. Gervasio

    PowerMac G5 Hackintosh with original PSU and cooling

    Hi there! This is the first post I make in this community, but it's the result of hundreds of hours spent lurking. I present to you my PowerMac G5 Hackintosh: This is the result of months of research, work and frustration. The list of parts: -Supermicro X8SIL-F Motherboard -Intel Xeon...
  9. krachbumms

    Can't see Samsung 960 pro in clover (Supermicro XDAi9)

    Hi! I try to boot from my SSD into my Samsung 960 pro, but I can't see the drive in the clover boot menu. (I installed the NvmExpressDxe-64.efi in drivers64UEFI). When I boot from my SSD I am able to see the Samsung drive (via HackrNVMeFamily-10_12_5.kext), but I want to be able to boot macOS...
  10. krachbumms

    Supermicro X9Dai (X77/C602) + Samsung 960 pro (clover)

    I ran into a big obstacle trying to boot from Samsung 960 pro on a Supermicro X9Dai, the partition simply doesn't show up in the clover bootmanager (funny enough though, the rescue partition does) Configuration: - SSD with working 10.12.3 - m.2 via a PCIe adapter card My steps: boot from SSD...
  11. dasos

    SuperMicro X10DRH-i?

    Hey Guys, So I got a pretty bawler server from work that we are not using anymore. It has a SuperMicro X10DRH-i Rev 1.01 board. Has any had any luck with the X10 series? Ive "sorta" got it too boot a few times but not consistent or stable (UniBeast Stick). Ive seen others have got SuperMicro to...
  12. misterphoton

    Sierra & El Capitan install fails, SuperMicroX9DAi

    Hello, please look at the images below. I am unable to install vanilla El Capitan or Sierra. I am getting close. It locks up at the very last minute before the installer screen, but I cannot see what the error/errors are. Here are my hardware specs: SuperMicro X9DAi motherboard with two 6...
  13. schlomow

    Graphics Adapter for SuperMicro X8DTH-6F

    Hi there, although this is an old setup, I am still thinking about trying out OSX on a SuperMicro X8DTH-6F board (which is running Linux happily right now). Does anybody have experience with this board using "any" version of osx. And: which graphics adapter do you use? the board has 7 PCIe 2.0...
  14. insomniack

    Gtx 550 ti Artifacts After Web Drivers install

    I am having artifacts on the screen. Installed Sierra 10.12.2 and web drivers. It starts after I install web drivers. It all starts just after the boot no need to run a software. Using the same build with windows installed and no problems. Trying to fix that weirdness with graphics before coming...
  15. thisguyiknow

    SUPERMICRO X8DAH+-F SUCCESS [SORT OF]

    I have built my seventh hackintosh and this one was definitely the most difficult but also the strongest machine to date [dual x5680 @3.3GHZ 6-core] --- I have everything working except sound (Ethernet is provided by the AppleIGB kext) -- the sound chip is a Realtek 888 7.1. Using Chimera did...
  16. jogaleins

    Dual Xeon CPU not fully utilizing the 2nd CPU

    I have dual xeon CPU running El-Capitan. About this MAC shows 2X2.4ghz processor. 1. hwmonitor I can only see 8 cores instead of 16 cores. 2. I've installed htop and I can see 16 cores in the terminal. but when I run cinebench r15. htop utilization shows only 8-cores being used. The remaining...
  17. johnwwweissberg

    Any chance of loading OSX onto Broadwell-DE

    Supermicro is offering some very low-cost servers using the Broadwell-DE SoC from intel like this: https://www.servethehome.com/intel-xeon-d-soc-changing-broadwell-de/ https://www.supermicro.com/products/system/1U/5018/SYS-5018D-FN4T.cfm For me, the very attractive thing about these servers...
  18. dkontis

    Lean Mean editing machine for Final Cut Pro X?

    I am about to built an system for video editing on Final Cut Pro X for a client and we need maximum performance and at least 2 monitors and a SDI video output for monitoring. I was thinking about these parts. 2 x Intel Xeon E5-2660 SR0GZ (around 120€ used from ebay, both without heatsink)...
  19. igouroum

    Supermicro X8DAL-i RAM undetected

    Hi, I've recently replaced my Supermicro X8DTH-iF with an X8DAL-i, reason being the former didn't work at all with OSX. With the new mobo it's going pretty smooth, except for the fact that 3 of my 6 ram slots are undetected. If only three slots are populated, it runs perfectly fine...
  20. WindowsOS

    Supermicro X9SRA - Hangs at "Still waiting for root device" and Prohibited sign

    I recently built a new computer and I want to install El Capitan on it. However, I am not able to get to the installer. Here is some of my specs: Mobo: Supermicro X9SRA w/ BIOS revision 3.1 CPU: Intel Xeon E5-2660 GPU: Nvidia GeForce GTX 780 RAM: 16 GB DDR3 I tried out multiple boot flags and I...
Top