Contribute
Register

Graphics problem

Status
Not open for further replies.
RehabMan said:
Why are AppleIntelSNBGraphicsFB/AppleIntelFramebufferCapri patched?

Code: 
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleIntelSNBGraphicsFB.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleIntelFramebufferCapri.kext

Restore to vanilla.
Click to expand...

All kext were patched after installation with multibeast. Now I restored those two.
 

Attachments

  • ioreg.ioreg
    1.5 MB · Views: 96
  • terminal.txt
    1.9 KB · Views: 100
Mechislav said:
All kext were patched after installation with multibeast. Now I restored those two.
Click to expand...

CI is working, but not QE (maybe you need dart=0)

There is much wrong:
- VoodooTSCSync is not appropriate for laptops
- NullCPU is not appropriate for laptops
- MacPro3,1 is not a laptop SMBIOS
see here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html
- GenericUSBXHCI.kext should be avoided on 10.10 (doesn't work at all on 10.11)
- EvOreboot is not needed
 
RehabMan said:
CI is working, but not QE (maybe you need dart=0)

There is much wrong:
- VoodooTSCSync is not appropriate for laptops
- NullCPU is not appropriate for laptops
- MacPro3,1 is not a laptop SMBIOS
see here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html
- GenericUSBXHCI.kext should be avoided on 10.10 (doesn't work at all on 10.11)
- EvOreboot is not needed
Click to expand...

The guide assumes I am running Multibeast for the first time. Will it still work for me?

- GenericUSBXHCI.kext should be avoided on 10.10 (doesn't work at all on 10.11)
- EvOreboot is not needed
Click to expand...

How do I repair these issues?
 
After I used DSDT-Free mode and removed the two kexts I am unable to boot and get the following messages
WP_20151011_001[1].jpg
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top