- Joined
- Oct 22, 2010
- Messages
- 323
- Motherboard
- z68a-d3-b3
- CPU
- i7-3770k
- Graphics
- GTX 650
Hi jbamford,
Does it mean that I have no escape from this?
I've tried disabling USB3 as well... but still.
The 'funny' part is that Elite2k has the same mainboard and he's not complaining about any sleep issues.
So I'm kinda pushed to think that it has to be something else... or some config that I might have missed...
For example, using iMac13,2 USB does not work at all. I had to put iMac12,2 to have them functional...
Hi.. I really dont have any sleep issues, Also I did disable usb 3.0 in the bios.. the usb 3.0 on this minboard is not supported anyway You can buy the supported pci which works out of the box. However I can tell u this much using a incorrect smbios will result in all kinds of wierd usb issues..ie only 1 port in the front working... and only certain ones in the back etc.. I have experienced that issue. I resolved it using the proper smbios. Lastly, if your still having a ton of issues, reflash the 1c bios change default settings to the required ones and try again.
Note: iMac 12,2 is the right smbios for your CPU i7 2600k make sure u use that or else u will continue to have USB / speedstep etc issues..
These are the real imac models that used your cpu which is sandybridge (use only this unless u change to ivy bridge etc)
http://www.everymac.com/systems/app...inch-aluminum-mid-2011-thunderbolt-specs.html
Apple iMac "Core i7" 3.4 27-Inch (Mid-2011) Specs
Identifiers: Mid-2011 - BTO/CTO - iMac12,2 - A1312 - 2429
To quote "Rehabman" just remember you choose an SMBIOS that closely matches the hardware This is a key step in getting your machine to work properly
GL