This update looks like ITE IT5702 controller update (it's Q-Flash Plus and RGB controller on our motherboards)Same problem for me: Access Denied.
MCU = Microcontroller Unit. It's also known as Embedded Controller (EC) on PC motherboards.
Recommendations for Windows Dual Boot:
If this system is intended to be a dual boot system with Windows, then Windows should be installed first. The presence of a macOS disk may confuse the Windows installer. If Windows is to be installed on an NVMe SSD, it should be installed into the NVMe slot closest to the CPU. This will prevent future Windows Feature Updates from interfering with the EFI partition on the macOS SSD. Broadcom drivers for a Fenvi FV-T919 or other Mac-compatible Broadcom WiFi/BT module should not be installed in Windows. This allows Windows to use the Intel AX201 WiFi 6 / Bluetooth 5 module instead.
Hi,
I'm building a Hackintosh based on x299 ASUS WS SAGE/10G motherboard. I read your guide paying attention and since I'll build a dual boot system (macOS + W 10), I noticed your recommendation quoted above. I was wondering what NVMe slot is to intend as closest to CPU on my motherboard? I attach the related image. Tx
You must use the new SSDT-UIAC-VISION-D-V2.aml in the build guide and also enable the XhciPortLimit checkbox in Kernel Quirks section of config.plist. The new SSDT is in the "V2-OC-STD-059-..." zip file.Sorry I'm back again, it's thunderbolt this time, when I connect ipad to it, it's showing charging but no data connection, cant see it from finder or any app, just charging, when I connect a SSD to it, there's nothing coming out either. Dont know if I explained the situation clearly, looking forward to your thoughts and solution maybe.
Thanx again.
Is the system bootable?View attachment 477683
z490 vision d with 10700k
MCU firmware update failed after I update the Bios F5a .
it said chipid mismatch and locked, anyone got this problem?
Please click here and enter your CPU, Graphics and Motherboard information. This is required when asking for help.Hi,
I'm building a Hackintosh based on x299 ASUS WS SAGE/10G motherboard. I read your guide paying attention and since I'll build a dual boot system (macOS + W 10), I noticed your recommendation quoted above. I was wondering what NVMe slot is to intend as closest to CPU on my motherboard? I attach the related image. Tx
Looking at the picture of your session with the last thread dimed, for me that happens when there is heavy CPU overhead required on the master channel (your Waves SSL comp!) or the channel you have selected (the drums via Kontakt). I find it difficult to believe that either of those are responsible, even at 96k with small buffers, but maybe something weird is happening with Kontakt or Waves. Maybe select an empty audio track and see if things improve.Has anyone got a decent working EFI folder they can share for the Vision G at all?
Mine has got all sorts of intermittent problems when tracking in LPX
Is the system bootable?
@sambear the same happend to me. The process crashed at first try and now I get the same error message that you posted. The system is still bootable but RGB Fusion 2.0 isn't working anymore. The RGBs light up white. I don't recommend trying it right now.
I just opened a ticket at Gigabyte's website about it.