- Joined
- Jul 31, 2015
- Messages
- 80
- Motherboard
- Z490 Vision G
- CPU
- i7-10700K
- Graphics
- RX 580
- Mac
Yeah, iStat is the one broken according to this thread - https://github.com/acidanthera/bugtracker/issues/959
I use HWMonitorSMC2. Unfortunately, iStat Menus may be feature-packed, but it's too slow to load and a bit too heavyweight.I guess this has something to do with iStat Menus. Because HWMonitorSMC2 is able to read all fans[1] while iStat will only read the CPU fan.
Which app are you using on Vision D to read the fan speeds?
[1] https://github.com/CloverHackyColor/HWMonitorSMC2/
Bootcamp is meant to allow Windows to run on real Macs. The firmware (BIOS) of a real Mac is not what Windows expects, so Bootcamp is necessary to make the Mac compatible with Windows. Bootcamp also provides drivers for the devices built in to Apple Macs.I'm proud to say I followed all the steps now and I was able to dual boot windows following Casey's procedure.
Now I'm having two new questions:
1) Is it possible to install bootcamp drivers (so I can reboote into windows and vice versa without going through opencore, and also so I don't have to constantly reconnect my magic mouse and so I have full compatibility with my apple keyboard?
Added to Troubleshooting / FAQs section in Post #1:I was able to fix it, rendering time now fastest ever.... from 7 minutes to 2:38 minutes in a Final Cut
now iGPU is visible under Graphics/Display together with Radeon VII and also both card working, tried DP on MB for iGPU and it is working fine.
...
Hi CaseySJ,
Because you're setting Initial Display Output to IGFX, do you have a second monitor connected to one of the on-board video ports?Hi CaseySJ,
It is not just for radeon VII, before this yesterday I tried with vega 56 and there also I was getting very slow rendering times
Because you're setting Initial Display Output to IGFX, do you have a second monitor connected to one of the on-board video ports?
If not, do you see the Gigabyte Splash Screen and OpenCore Picker during boot?
Are there any extra steps or tweaks for 20.2 and 0.6.1?Yes that’s right. When 0.6.1 is officially released I’ll update the EFI in the main build guide.