Hey, there! I followed your guide and used your config.plist for OpenCore 0.5.9 as a base (with some slight modifications...may or may not have screwed it up because of them, but I didn't change most of what was there, if anything...mainly only may have added a couple things, slight differences on kexts/drivers and put in my SMBIOS info), and I get this error at the bios splash screen. It's the Z390 M Gaming board. I've read about the data type 1 and 2 messages, but not this specific message. I'm trying to get OpenCore to recognize the NVMe drive I cloned from my Clover drive. The EFI on the NVMe drive is set up for OpenCore, with the same main partition as my Clover drive. If I boot through Clover, the drive shows up and boots fine (although slowly), even though it's an OpenCore EFI. But, if I try to give boot priority to the NVMe drive and boot through OpenCore, I get this error on the BIOS screen and the black OpenCore menu after doesn't list that drive, even though my Clover drives are listed.
"OCS: Failed to parse data field as value with type data and <qpWx3asni5u=> contents, context <ROM>"