- Joined
- Jan 25, 2010
- Messages
- 13
- Motherboard
- Z390 Designare
- CPU
- 9700K
- Graphics
- RX 580
- Mac
- Mobile Phone
As per rules, please update your hardware profile to allow others to help you easierOC 0.7.2
mobo Gigabyte X299X Designare 10G, F3C with 6800 XT on Big Sur 11.4.
There is still USB issue, all USB port was gone.
somebody resolve this issue?
The 6800XT and 6900XT should work fine on any version of OC.OC 0.7.2
mobo Gigabyte X299X Designare 10G, F3C with 6800 XT on Big Sur 11.4.
There is still USB issue, all USB port was gone.
somebody resolve this issue?
And I have a question 6800 XT working on OC 0.6.8?
ThanksThe 6800XT and 6900XT should work fine on any version of OC.
The USB issues are not related to the GPU. They're because you don't have a USB port map. Check for my earlier posts in this thread, where I uploaded my EFI including a USB port map. Some other people have uploaded theirs as well.
HIF3h bios has been posted on the official website.
I can't boot up what the problem is.
I think I have to give up.
https://www.gigabyte.com/Motherboard/X299X-DESIGNARE-10G-rev-10/support#support-dl-bios
Thank you for your answer. I think I should do the same. I think Hackintosh is difficult with the X299X Designare 10G board.HI
Since Big Sur 11.3 the recent bios do not work.
If you use Big Sur the only solution is the F3c BIOS
But this bios has a lot of bugs (I had a lot of problems personally).
I gave up Gigabyte and bought an Asus motherboard => No problem
Hi,I got this board in September and have the F2 bios on it at the moment, I have got my settings dialled in fairly well but waiting on better cooling before trying to overclock (only have a EKWB 240mm AIO as it stands).
Should I upgrade the bios to F3C / if I do, can I go back? Sorry if this is obvious...!
Thanks for all your help so far!