Gigabyte ga-z77p-d3, Corsair DDR3 8g, i5 3450, redeon HD6750

[kunghang]

And your systems now boots from HD without USB stick? Did you use EasyBeast setup from Multibeast with target HD (Lion)?

Run Installation MultiBeast 4.5.1
1. Introduction Click Continue.
2. Read Me Click Continue.
3. License Click Continue. and Click Agree.
4. Installation Type selected only "EasyBeast Install". Click Continue. and Click "Change Install Location." and selected HDD partition "Lion" Click Continue. and Click Install.
5. Enter Password.
6. It said "Successful".
7. Restart.
7.1 Reboot from HDD. Stop at Apple Logo.
7.2 Reboot from USB and selected to HDD. Stop at Apple Logo same.

 

[i5osx]

Once again: start in verbose mode (type -v at chimera boot screen) an tells us whats listed at the end of the text. Maybe take a photo of your screen.

 

[kunghang]

Once again: start in verbose mode (type -v at chimera boot screen) an tells us whats listed at the end of the text. Maybe take a photo of your screen.

This is first picture if you want to see.

 

[kunghang]

Once again: start in verbose mode (type -v at chimera boot screen) an tells us whats listed at the end of the text. Maybe take a photo of your screen.

This is after push Power off.

 

[i5osx]

It seems that other members of the tonymac forum share your problem with the authentication service after the installation of a 10.7.4 combo update.

Look at thread
viewtopic.php?f=3&t=59886&start=320

an see the post from "ntoxicator". So you may find help in that thread... Good luck!

 

[kunghang]

It seems that other members of the tonymac forum share your problem with the authentication service after the installation of a 10.7.4 combo update.

Look at thread
viewtopic.php?f=3&t=59886&start=320

an see the post from "ntoxicator". So you may find help in that thread... Good luck!

It very difficult for me to be understand.

If this my problem came from Hardwares.
What is my part to be change.? MB, CPU, RAM, VGA, IOS. and
Pleased tell me the model of part to changed.

 

[i5osx]

I don't know. But look here:
viewtopic.php?f=22&t=8725

If i where you i would personally try to get my system running with a Sandy Bridge CPU (i3/i5/i7-2xxx).

But maybe its not the solution for your problem. You do all changes on your own (financial) risk.

 

[kunghang]

I don't know. But look here:
viewtopic.php?f=22&t=8725

If i where you i would personally try to get my system running with a Sandy Bridge CPU (i3/i5/i7-2xxx).

But maybe its not the solution for your problem. You do all changes on your own (financial) risk.

I think first thing to do can boot my Hackintosh system with HDD.
What is the answer?
If your selection between
1. GA-H61M-D2-B3 (rev. 1.1), no have in topic list, have in DSDT database
http://th.gigabyte.com/products/product ... id=3915#ov

2. GA-P61-USB3-B3 (rev. 1.1). Show in topic list, have in DSDT database
http://th.gigabyte.com/products/product ... id=3904#ov

3. Change CPU to "Sandy Bridge CPU"
Because the UserDSDT easy to completed for me.

 

[Asus-Freak]

i5osx: You are a brave and patient man!

 

[kunghang]

Now I can boot my Hackintosh with HDD. I am very glad and thank you.

Next step install the drivers.
1. Run MultiBeast 4.5.1 for install sound driver. I don't selected anything.

"Installation Type" and "Drivers & Bootloaders" and "Kexts & Enablers" and "Audio"
1.1 Selected "ALC8xxxHDA" and "AppleHDA Rollback" and restart. Not work.
1.2 Selected only "ALC8xxxHDA" and restart. Not work.

*My manual it said "Realtek ALC887 codec, High Definition Audio"

Can you help me for this thing?

2. Run Chimera 1.9.2-1
3. Run Chameleon Wizard for set resolution monitor. It Good Work.