- Joined
- Jan 9, 2015
- Messages
- 28
- Motherboard
- Asus Maximus VIII Hero
- CPU
- i7 6700K
- Graphics
- Intel HD Graphics 3000, EVAGA GTX Geforce950SC
- Mac
- Mobile Phone
This weekend i started to assemble the CustoMac Pro as per the buyer's guide with the below listed parts.
After finishing assembling i wanted to start install the os, but i did not get any picture, only the mobo showed 55 and restarted itself after 10-15 seconds repeatedly.
After some googling i found out that error 55 is releated to memory, so i tried to switch to different slots, going thru all possible combinations of the 4 slots i.e. 1+2;3+4;2+4;1+3; etc., without any success. Even with no ram in the slots i had a error 55, with the sole difference that it went faster to error 55 and restarting again. I also changed the Fan slots for the CPU Watercooler, both for pump and fan, with the same results, error 55 with no screen at all.
I have been very careful when assembling the machine, allways wearing a wrist for grounding to avoid any static electricity.
So i am now a bit lost for reasons why it wont work, except that the mobo might be faulty.
As i found other people having had sucess with the same specs i have, i doubt that the ram is not working with this mobo. Some on ****** said that skylake i7 6700K would only work with 2133MHz Ram.
Has anyone run into the same problems or knows a bit more then i do? Any suggestions on how i could solve it are appreciated!
Gigabyte GA-Z170X-UD5 TH
Core i7-6700K
Corsair H60 (Water)
EVGA GTX 950 SC
Crucial Ballistix Sport LT White(32GB)
Samsung 850 EVO 500GB
Samsung 850 EVO 250GB
Corsair RM 650 Watt
Corsair Carbide 300R
After finishing assembling i wanted to start install the os, but i did not get any picture, only the mobo showed 55 and restarted itself after 10-15 seconds repeatedly.
After some googling i found out that error 55 is releated to memory, so i tried to switch to different slots, going thru all possible combinations of the 4 slots i.e. 1+2;3+4;2+4;1+3; etc., without any success. Even with no ram in the slots i had a error 55, with the sole difference that it went faster to error 55 and restarting again. I also changed the Fan slots for the CPU Watercooler, both for pump and fan, with the same results, error 55 with no screen at all.
I have been very careful when assembling the machine, allways wearing a wrist for grounding to avoid any static electricity.
So i am now a bit lost for reasons why it wont work, except that the mobo might be faulty.
As i found other people having had sucess with the same specs i have, i doubt that the ram is not working with this mobo. Some on ****** said that skylake i7 6700K would only work with 2133MHz Ram.
Has anyone run into the same problems or knows a bit more then i do? Any suggestions on how i could solve it are appreciated!
Gigabyte GA-Z170X-UD5 TH
Core i7-6700K
Corsair H60 (Water)
EVGA GTX 950 SC
Crucial Ballistix Sport LT White(32GB)
Samsung 850 EVO 500GB
Samsung 850 EVO 250GB
Corsair RM 650 Watt
Corsair Carbide 300R