Giacomoleopardo's Workstation Triplet

[Utamaru]

i couldn't even got el capitan to boot, could it be because of the gtx 1080?!

GTX 1080 not supported, all Pascal cards not supported now, only Maxwell witch GTX 980 Ti is

 

[Labirinth85]

Hi folks, I'm pretty new with hackintosh, but I tried to adapt this guide to my config:
i7-6800k, Asus X99 Deluxe/u3.1, Asus 980ti strix, 64gb Crucial Ballistix Sport LT 2400 (4x16gb)

badly don't work

I followed this guide and tried:
- upgrade BIOS to latest firmware (3301)
- kernel flag npci=0x3000, slide=0, nvda_drv=1, nv_disable=1 in various combo
- FAKECPUID 0x0306E0, 0x0306F0, 0x0306A0
- KernelPm, KernelHaswellE, Apple RTC
- Also tried with OsxAptioFixDrv-64.efi, OsxAptioFix2Drv-64.efi and Test2-2016.efi
- VoodooTSCSync.kext (set to 11) and NullCPUPowerManagement.kext

Nothing to do, i reach always this kernel panic message:
https://www.tonymacx86.com/attachme...3/?temp_hash=49752779ca96c0b1d4f64e60cbe2ebc2

Hope someone can help me XD
Thanks

in attached files one of my last attempts

 

[DylanKpak]

Great tutorial! Have everything working as per your instructions. Does this setup work with macOS Sierra? I've tried it and it immediately reboots after the verbose line [PCI Configuration Begin]. Curious if it my hardware or if it's not working for anyone else. Let me know!

Mobo: Asus X99-II
CPU: Intel 6800K
GPU: XFX Radeon Rx 480 8GB
RAM: Corsair Vengeance 16GB

 

[Ciaodiablo]

The latest security update 2016-002 from Apple will kill the 10.11.6 build once installed with the new nvidia drivers package WebDriver-346.03.15f04.pkg

I did a complete new build as per guide, installed all available updates from the store (including the 2016-002 update) rebooted fine, installed the latest nvidia drivers and ran the two step patch for Mac Pro profile 6,1 as per the guide with nvda_drv=1 enabled and then rebooted. System boots past DSMOS and then reboots everytime when it tries to load the nvidia Web drivers.

Have nv_disable=1 enabled still won't boot into desktop. Tried different options and no go.

So Rebuilt 10.11.6 again with all updates excluding the 2016-002 but installed the 2016-001 update and configured as per guide, all good again. Working fine with the
Nvidia WebDriver-346.03.15f03.pkg

Still no USB 3.1 ports working....

 

[Ciaodiablo]

@DylanKpak

I haven't got macOs Sierra working yet with using this guide as a reference. I get that same reboot at line [PCI Configuration Begin]
& i have tried everything and no go. I believe it's just not compatible with my Broadwell i7 6900K. Hopefully there will be a solution soon...

Or it could be MOTHERBOARD specific incompatibility...who knows right? All comes down to hardware...

 

[skyegreen42]

I get that same reboot at line [PCI Configuration Begin]
& i have tried everything and no go.

Are you using -x during the boot process? That's usually where my setup restarts when using -x.

 

[teagls]

Guide worked flawlessly. Thank you for all the effort and work put into this. I am using the 6850K and wanted to overclock. Does oc work? Don't know if I saw any details on that.

 

[thenightflyer]

Hi folks, I'm pretty new with hackintosh, but I tried to adapt this guide to my config:
i7-6800k, Asus X99 Deluxe/u3.1, Asus 980ti strix, 64gb Crucial Ballistix Sport LT 2400 (4x16gb)

badly don't work

I followed this guide and tried:
- upgrade BIOS to latest firmware (3301)
- kernel flag npci=0x3000, slide=0, nvda_drv=1, nv_disable=1 in various combo
- FAKECPUID 0x0306E0, 0x0306F0, 0x0306A0
- KernelPm, KernelHaswellE, Apple RTC
- Also tried with OsxAptioFixDrv-64.efi, OsxAptioFix2Drv-64.efi and Test2-2016.efi
- VoodooTSCSync.kext (set to 11) and NullCPUPowerManagement.kext

Nothing to do, i reach always this kernel panic message:
https://www.tonymacx86.com/attachme...3/?temp_hash=49752779ca96c0b1d4f64e60cbe2ebc2

Hope someone can help me XD
Thanks

in attached files one of my last attempts

If you refer to Sierra install, follow these guidelines:
remove unuseful kernel flags and put only npci=0x2000 and darkwake=0 if you will use sleep/wake;
uncheck in clover KernelPM and KernelHaswellE...don't need anymore;
use OsxAptioFixDrv-free2000 instead of those 3 you put;
try Fakecpuid 0x40674;
remove NullCPU...there is no more need to use it;
I attach you a config.plist as example, where you can take patches for kexts to use to boot the system.

 

[Ciaodiablo]

@thenightflyer

I have used your config.plist and your above guidelines and without using a CPU power management option (in Clover) I get a CPU panic when trying to boot the USB stick. When a PM option is selected I manage to boot USB stick up to the [PCI Configuration Begin] stage where it automatically reboots. I cannot get it past this stage, let alone to the installer & i have tried everything...

Guess I will stick to El Capitan for now...hope someone out there has a solution for i7-6900K & Asus Rampage V Edition 10 with GTX 980 Ti for Sierra...???

Thanks

 

[noodlebug]

I'm also having trouble with 'audio_cloverALC-110_v1.0s10.command' not completing. Everything else working. I've tried all the audio command scripts but none complete. Any help appreciated.