GA-Z97X-UD5H Boot Loop

[tc92]

I just finished building a customer pro with the following components:

gigabyte GA-Z97X-UD5H
Intel i7 4790k
EVEGA Geforce GTX 760 sc
Patriot Viper ram 8gb*2

And have made it through the majority of Yosemite install using unibeast and multibeast with the flags
-x GraphicsEnabler=No. However when I restart the system to boot from the hard rive to complete the installation the computer get stuck looping the chimera progress bar and then a flash of the apple logo.
I am new to all this and would appreciate any advice.

Thanks for reading
Cheers

 

[Solidww]

What options did you use to install Chimera? Also, did you use EFI partition to method for your chimera boot mode? You shouldn't need it since your on a Gigabyte motherboard.

 

[tc92]

i did partition the drive according to the installation guide should i reinstall and skip that step?
the chimera options were

-x and GraphicsEnabler=no

my multibeast options are

http://www.tonymacx86.com/attachments/user-builds/98660d1405309367-success-ga-z97x-ud5h-i7-4790k-32gb-gtx-760-10-9-4-screen-shot-2014-07-13-11.17.33-pm.png


let me know if i need to elaborate further

cheers

 

[raymondau]

Have you add nvda_drv=1 to your boot flag and install the nvidia web driver for your VGA card?

 

[tc92]

Not yet I will try that now
also
when i choose the boot drive I have two choices both are my ssd I have installed which do I choose after installation ?

 

[beelzebozo]

http://www.tonymacx86.com/yosemite-...x-ud5h-16gb-ram-intel-hd-graphics-4600-a.html

 

[tc92]

I just added that boot flag and got this

 

[tc92]

Thank you I'll try this!

 

[tc92]

I tried all of these but nothing changed
any other suggestions?

 

[raymondau]

You better boot from usb and choose the drive you have installed Yosemite with -v -x and nv_disable=1 npci=0x2000. After entering the OS in safe mode, you need to install the nvidia web driver for your yosemite version.