- Joined
- May 4, 2015
- Messages
- 24
- Motherboard
- GIGABYTE X99-UD4
- CPU
- i7-5820K
- Graphics
- gtx 1060 6gb
- Mac
- Mobile Phone
GA-X99-UD4,5820K,EVGA GT740- can't get into instalator please help
Hello Guys! so here are the spec:
i7 5820k
ga-x99-ud4 rev 1.0 Bios f11
EVGA gt740 Sc 4GB
16gb g.Skill Ripjaws
SSD plextor
Storage 1tb WD
h105
i have set all bios features to "optimised" and added something like this:
manual on XHCI and idstable hand-of
sata in AHCI mode
next i have follow the famous Bob Roche guide on YT (from InsaneCultist thread) what is popular here during installation of X99
when i was paching using Stinga11 tip i have issue that after commands in terminal i did not have to put the password and thats was different than in tutorial video < maybe this is the clue?
next i have booted from usb and all the time i have stuck on apple logo , sometimes few pixels was loaded and sometimes nothing.
so i have start using different flags like:
1:
npci=0x300 -f -x -v graphicsenabler=no
resoult:
2:
npci=0x300 -f -x -v
resoult:
3:
npci=0x3000 PCIRootUID=1 -f -x -v
resoult:
4:
npci=0x3000 maxmem=4096 PCIRootUID=1 -f -x -v
resoult:
also have tired all of those flags alone , in different combination also have used all other what i could find here in forum.
now have no idea what to do and I'm afraid that i must buy gtx9xx to make this **** working
i gonna make fresh unibeast usb yosemite stick just in case that maybe this copy got any bug :/
i bought this evga card due to the buyers guid that i found here so there should be some fix or way to solve this? right ?
Do You have any ideas what could i do ?
Thanks in Advance!
Hello Guys! so here are the spec:
i7 5820k
ga-x99-ud4 rev 1.0 Bios f11
EVGA gt740 Sc 4GB
16gb g.Skill Ripjaws
SSD plextor
Storage 1tb WD
h105
i have set all bios features to "optimised" and added something like this:
manual on XHCI and idstable hand-of
sata in AHCI mode
next i have follow the famous Bob Roche guide on YT (from InsaneCultist thread) what is popular here during installation of X99
when i was paching using Stinga11 tip i have issue that after commands in terminal i did not have to put the password and thats was different than in tutorial video < maybe this is the clue?
next i have booted from usb and all the time i have stuck on apple logo , sometimes few pixels was loaded and sometimes nothing.
so i have start using different flags like:
1:
npci=0x300 -f -x -v graphicsenabler=no
resoult:
2:
npci=0x300 -f -x -v
resoult:
3:
npci=0x3000 PCIRootUID=1 -f -x -v
resoult:
4:
npci=0x3000 maxmem=4096 PCIRootUID=1 -f -x -v
resoult:
also have tired all of those flags alone , in different combination also have used all other what i could find here in forum.
now have no idea what to do and I'm afraid that i must buy gtx9xx to make this **** working
i gonna make fresh unibeast usb yosemite stick just in case that maybe this copy got any bug :/
i bought this evga card due to the buyers guid that i found here so there should be some fix or way to solve this? right ?
Do You have any ideas what could i do ?
Thanks in Advance!