[Fix] Intel HD4200/HD4400/HD4600 Mobile on Yosemite

[mo7a1995]

looks like its injected correctly .

 

[RehabMan]

looks like its injected correctly .

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

 

[mo7a1995]

Okay

 

[RehabMan]

Okay

The device-id=0412 is now there. But no kexts are loading for it. You must have damaged/deleted them (eg. bad permissions, patched but kext-dev-mode=1 not supplied, incorrect edits to the Info.plist, kexts deleted, etc).

Do a fresh install.

 

[mo7a1995]

oh :-

can't i just copy those kexts from my other hackintosh ?
and if no if i did a fresh install for this thing to work do i have to upgrade to 10.10.2 or 10.10 is good ?

 

[mo7a1995]

Okay installed OS X 10.10
and still the same thing , NOT WORKING

what's going with this graphics !!

 

[jacky8hyf]

Hi,
I have read carefully post#1 (I think).
I installed FakePCIID, AppleIntel5000Graphics, AppleIntelFrameBufferAzul in both /S/L/E and in Clover Kexts.
I have DSDT patched (very naively; just extract the system DSDT and fixed all errors.)
I have Inject/Intel and Inject/EEID in config.plist. I also injected FakeID/IntelGFX=0x04128086 and ig-platform-id=0x0a260006.
Currently I have correct resolution and Graphics RAM, but no QE/CI.
kextstat shows that FakePCIID may not be loaded correctly. (`kextstat | grep "ake"` only shows FakeSMC)
Any ideas how to enable QE/CI?

PS mine is a laptop

Attached below are my ioreg/dsdt/config.plist

View attachment IOREG.ioreg
View attachment dsdt.aml
View attachment config.plist

 

[RehabMan]

Okay installed OS X 10.10
and still the same thing , NOT WORKING

what's going with this graphics !!

Post EFI/Clover folder you're using to boot.

 

[RehabMan]

Hi,
I have read carefully post#1 (I think).
I installed FakePCIID, AppleIntel5000Graphics, AppleIntelFrameBufferAzul in both /S/L/E and in Clover Kexts.
I have DSDT patched (very naively; just extract the system DSDT and fixed all errors.)
I have Inject/Intel and Inject/EEID in config.plist. I also injected FakeID/IntelGFX=0x04128086 and ig-platform-id=0x0a260006.
Currently I have correct resolution and Graphics RAM, but no QE/CI.
kextstat shows that FakePCIID may not be loaded correctly. (`kextstat | grep "ake"` only shows FakeSMC)
Any ideas how to enable QE/CI?

PS mine is a laptop

Attached below are my ioreg/dsdt/config.plist

View attachment 127740
View attachment 127739
View attachment 127738

Note:
- VoodooTSCSync is not appropriate for a laptop. Read here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

- The FakePCIID kexts are not installed. Read post #1.

- You should not install replacement graphics kexts. Do a fresh install.

- Your config.plist is really wrong. Read here: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

 

[jacky8hyf]

Note:
- VoodooTSCSync is not appropriate for a laptop. Read here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

- The FakePCIID kexts are not installed. Read post #1.

- You should not install replacement graphics kexts. Do a fresh install.

- Your config.plist is really wrong. Read here: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

Hi Rehabman,
For 1 and 4, working on them.
For 2, I have kext wizard installing FakePCIID to both /S/L/E and in Clover kexts; it just doesn't seem to be loaded. Why would this happen? How should I make it loaded?
For 3, the graphics kexts are vanilla; what I mean by "install" is restoring the backup kexts (since I cannot boot for the first time with graphics kexts, I removed all Intel/ATI/NVidia graphics kexts; and after I boot into the system I restored only 5000 and Azul. should I also restore the others?)

Thank you!