- Joined
- Jan 1, 2014
- Messages
- 168
- Motherboard
- EVGA Z370 Classified K
- CPU
- i5-9600K
- Graphics
- RX 570
- Mac
- Mobile Phone
I got a refurb HP Elite 8300 with builtIn Intel HD 4000
Issue1: USB Bootable need to be always inserted before startup otherwise it boots ok, but with a flickering screen.
I tried to upgrade to High Sierra with newer MultiBoot. It failed to update, after it was restarted. I now have newest Clover installed. When I boot from SSD, it boots to new Clover and then system starts fine, but with flickering screen
When I boot to install from USB, it boots from old-Clover and proceed to Install screen - no flickering.
Only difference I was was in the Boot Arg:
USB: Old-Clover has nv_disable=1
Before the clover starts from the SSD, I manually added the nv_disable=1, but no luck..
Any thing else I can try?
- Brand and Model: HP Elite 8300 Small Form Factor
- Memory Installed: 20GB DDR3
- Hard Drive: SSD on SATA0 and 3.5" 2TB on SATA1
- Processor: Intel Core i7 3rd Gen. i7-3770 3.4GHz
- Video Card: Integrated HD4000
Issue1: USB Bootable need to be always inserted before startup otherwise it boots ok, but with a flickering screen.
I tried to upgrade to High Sierra with newer MultiBoot. It failed to update, after it was restarted. I now have newest Clover installed. When I boot from SSD, it boots to new Clover and then system starts fine, but with flickering screen
When I boot to install from USB, it boots from old-Clover and proceed to Install screen - no flickering.
Only difference I was was in the Boot Arg:
USB: Old-Clover has nv_disable=1
Before the clover starts from the SSD, I manually added the nv_disable=1, but no luck..
Any thing else I can try?