Contribute
Register

El Capitan on Lenovo P50

Status
Not open for further replies.
I am trying this with a thinkpad p50 and this is the reboot log from my USB drive:

0:100 0:100 MemLog inited, TSC freq: 2809625310
0:100 0:000 MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100 0:000
0:100 0:000 Now is 10.7.2016, 18:25:23 (GMT)
0:100 0:000 Starting Clover rev 3599 on Lenovo EFI
0:100 0:000 Build with: [Args: ./ebuild.sh | Command: build -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.11.6 | XCODE: 7.3.1]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000) @5121DF18
0:100 0:000 SelfDirPath = \EFI\BOOT
0:100 0:000 Total Memory Slots Count = 4
0:100 0:000 Type 17 Index = 0
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140522
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 1
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140524
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 2
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140512
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 3
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140523
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Boot status=0
0:100 0:000 Clover revision: 3599 running on 20ENCTO1WW
0:100 0:000 ... with board 20ENCTO1WW
0:100 0:000 CPU Vendor = 756E6547 Model=506E3
0:100 0:000 got cores from CPUID_1 = 0
0:100 0:000 The CPU supported turbo
0:100 0:000 BrandString = Intel(R) Xeon(R) CPU E3-1505M v5 @ 2.80GHz
0:100 0:000 TSC/CCC Information Leaf:
0:100 0:000 numerator : 234
0:100 0:000 denominator : 2
0:100 0:000 Calibrated ARTFrequency: 24013891
0:100 0:000 MSR 0xE2 before patch 1E008006
0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on
0:100 0:000 MSR 0xE4 00051814
0:100 0:000 MSR 0xCE 0008083B_F1011C00
0:100 0:000 non-usable FLEX_RATIO = 10000
0:100 0:000 corrected FLEX_RATIO = 0
0:100 0:000 MSR 0x1B0 00000000
0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz
0:100 0:000 Corrected FSBFrequency=100MHz
0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100 0:000 Family/ExtFamily: 0x6/0x0
0:100 0:000 MaxDiv/MinDiv: 28.0/8
0:100 0:000 Turbo: 33/34/35/37
0:100 0:000 Features: 0xBFEBFBFF
0:100 0:000 Threads: 8
0:100 0:000 Cores: 4
0:100 0:000 FSB: 100 MHz
0:100 0:000 CPU: 2800 MHz
0:100 0:000 TSC: 2800 MHz
0:100 0:000 PIS: 400 MHz
0:100 0:000 PCI (00|00:00.00) : 8086 1918 class=060000
0:100 0:000 PCI (00|00:01.00) : 8086 1901 class=060400
0:100 0:000 PCI (00|01:00.00) : 10DE 13B0 class=030000
0:100 0:000 Found NVidia model=Unknown family 1FF
0:100 0:000 PCI (00|00:02.00) : 8086 191D class=030000
0:100 0:000 Found GFX model=Intel HD Graphics P530
0:100 0:000 PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100 0:000 PCI (00|00:14.02) : 8086 A131 class=118000
0:100 0:000 PCI (00|00:16.00) : 8086 A13A class=078000
0:100 0:000 PCI (00|00:16.03) : 8086 A13D class=070002
0:100 0:000 PCI (00|00:17.00) : 8086 A102 class=010601
0:100 0:000 PCI (00|00:1C.00) : 8086 A110 class=060400
0:100 0:000 PCI (00|00:1C.02) : 8086 A112 class=060400
0:100 0:000 PCI (00|04:00.00) : 8086 24F3 class=028000
0:100 0:000 PCI (00|00:1C.04) : 8086 A114 class=060400
0:100 0:000 PCI (00|00:1D.00) : 8086 A118 class=060400
0:100 0:000 PCI (00|3E:00.00) : 144D A802 class=010802
0:100 0:000 PCI (00|00:1D.04) : 8086 A11C class=060400
0:100 0:000 PCI (00|3F:00.00) : 10EC 525A class=FF0000
0:100 0:000 PCI (00|00:1F.00) : 8086 A150 class=060100
0:100 0:000 PCI (00|00:1F.02) : 8086 A121 class=058000
0:100 0:000 PCI (00|00:1F.03) : 8086 A170 class=040300
0:100 0:000 PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100 0:000 PCI (00|00:1F.06) : 8086 15B7 class=020000
0:100 0:000 LAN 0, Vendor=8086, MMIO=D5800000
0:100 0:000 Clover load options size = 0 bytes
0:119 0:019 Using OEM config.plist at path: EFI\CLOVER\config.plist
0:120 0:000 EFI\CLOVER\config.plist loaded: Success
0:120 0:000 Found theme directory: embedded
0:126 0:005 Found theme directory: random
0:131 0:005 Found theme directory: bluemac
0:147 0:015 Loading early settings
0:147 0:000 timeout set to 5
0:147 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:147 0:000 ForceKextsToLoad: 1 requested
0:147 0:000 ForceKextsToLoad 0: System\Library\Extensions\IONetworkingFamily.kext
0:147 0:000 KextsToPatch: 3 requested
0:147 0:000 KextsToPatch 0: AppleIntelSKLGraphicsFramebuffer (Disable minStolenSize less or equal fStolenMemorySize assertion, 10.11.4 ( (based on Austere.J patch)) :: patch disabled, skipped
0:147 0:000 KextsToPatch 1: IOAHCIBlockStorage (Enable TRIM for SSD) :: patch disabled, skipped
0:147 0:000 KextsToPatch 2: IOGraphicsFamily (Boot graphics glitch, 10.10.x/10.11.x (credit lisai9093, cecekpawon)) :: patch disabled, skipped
0:147 0:000 Default theme: Bluemac
0:147 0:000 ** Warning: unknown custom entry Type 'Other'
0:147 0:000 LoadDrivers() start
0:152 0:005 Loading HFSPlus.efi status=Success
0:165 0:013 - driver needs connecting
0:165 0:000 Loading FSInject-64.efi status=Success
0:168 0:002 Loading OsxFatBinaryDrv-64.efi status=Success
0:175 0:007 Loading DataHubDxe-64.efi status=Success
0:196 0:020 Loading OsxAptioFixDrv-64.efi status=Success
0:199 0:002 1 drivers needs connecting ...
0:199 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:199 0:000 HFS+ driver loaded
0:199 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:544 0:345 LoadDrivers() end
0:544 0:000 Dump SMC keys from NVRAM:
0:593 0:049 SetMaxResolution: found best mode 3: 3840x2160
2:524 1:930 Video mode change to mode #3: Success
2:524 0:000 - set
2:524 0:000 Console modes reported: 5, available modes:
2:524 0:000 Mode 1: 80x25 (current mode)
2:524 0:000 Mode 3: 128x40
2:524 0:000 Mode 4: 100x31
2:524 0:000 Mode 5: 480x113
2:524 0:000 SetScreenResolution: 3840x2160 - already set
2:524 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000)
2:524 0:000 MAC address of LAN #0= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #1= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #2= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #3= 50:7B:9D:AF:E8:28:
2:524 0:000 ScanSPD() start
2:525 0:000 SMBus device : 8086 A123 class=0C0500 status=Success
2:525 0:000 SMBus CmdReg: 0x1
2:525 0:000 Scanning SMBus [8086:A123], mmio: 0xD584D004, ioport: 0xEFA0, hostc: 0x1
2:525 0:000 Slots to scan [8]...
2:525 0:000 SPD[0]: Type 12 @0x50
2:543 0:017 Unknown vendor bank=0x80 code=0x2C
2:543 0:000 Not using XMP because it is not present
2:543 0:000 DDR speed 2132MHz
2:543 0:000 Slot: 0 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050E04
2:544 0:000 SPD[1]: Type 12 @0x51
2:562 0:017 Unknown vendor bank=0x80 code=0x2C
2:562 0:000 Not using XMP because it is not present
2:562 0:000 DDR speed 2132MHz
2:562 0:000 Slot: 1 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050F01
2:562 0:000 SPD[2]: Type 12 @0x52
2:580 0:017 Unknown vendor bank=0x80 code=0x2C
2:580 0:000 Not using XMP because it is not present
2:580 0:000 DDR speed 2132MHz
2:580 0:000 Slot: 2 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E0005070E
2:581 0:000 SPD[3]: Type 12 @0x53
2:598 0:017 Unknown vendor bank=0x80 code=0x2C
2:598 0:000 Not using XMP because it is not present
2:598 0:000 DDR speed 2132MHz
2:598 0:000 Slot: 3 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050E0B
2:599 0:000 ScanSPD() end
2:599 0:000 Get Acpi Tables List from RSDT:
2:599 0:000 Found table: FACP TP-N1E len=244
2:599 0:000 Found table: TCPA TP-N1E len=50
2:599 0:000 Found table: SSDT Tpm2Tabl len=1207
2:599 0:000 Found table: SSDT MeSsdt len=75
2:599 0:000 Found table: TPM2 TP-N1E len=52
2:599 0:000 Found table: UEFI TP-N1E len=66
2:599 0:000 Found table: SSDT SaSsdt len=20851
2:599 0:000 Found table: SSDT PerfTune len=1477
2:599 0:000 Found table: ECDT TP-N1E len=82
2:599 0:000 Found table: HPET TP-N1E len=56
2:599 0:000 Found table: APIC TP-N1E len=188
2:599 0:000 Found table: MCFG TP-N1E len=60
2:599 0:000 Found table: SSDT SataAhci len=5834
2:599 0:000 Found table: DBGP TP-N1E len=52
2:599 0:000 Found table: DBG2 TP-N1E len=84
2:599 0:000 Found table: BOOT TP-N1E len=40
2:599 0:000 Found table: BATB TP-N1E len=70
2:599 0:000 Found table: SLIC TP-N1E len=374
2:599 0:000 Found table: SSDT CpuSsdt len=3699
2:599 0:000 Found table: SSDT CtdpB len=1027
2:599 0:000 Found table: MSDM TP-N1E len=85
2:599 0:000 Found table: SSDT NvOptTbl len=4044
2:599 0:000 Found table: SSDT SgPeg len=108
2:599 0:000 Found table: ASF! TP-N1E len=165
2:599 0:000 Found table: FPDT TP-N1E len=68
2:599 0:000 Found table: UEFI TP-N1E len=298
2:599 0:000 Calibrated TSC frequency =2809625310 =2809MHz
2:599 0:000 Loading main settings
2:599 0:000 USB FixOwnership: true
2:599 0:000 Dropping 2 tables
2:599 0:000 Drop table 0 signature="MCFG" (4746434D)
2:599 0:000 set table: 4746434D, 0 to drop: true
2:599 0:000
2:599 0:000 Drop table 1 signature="DMAR" (52414D44)
2:599 0:000 set table: 52414D44, 0 to drop:
2:599 0:000 Config set Fixes will override FixMask mask!
2:599 0:000 final mask=80000000
2:599 0:000 PatchesDSDT: 6 requested
2:599 0:000 patch disabled, skipped
2:599 0:000 DSDT bin patch #1 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #2 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #3 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #4 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #5 lenToFind=4 lenToReplace=4
2:599 0:000 Config set PluginType=1
2:600 0:000 ForceKextsToLoad: 1 requested
2:600 0:000 ForceKextsToLoad 1: System\Library\Extensions\IONetworkingFamily.kext
2:600 0:000 KextsToPatch: 3 requested
2:600 0:000 KextsToPatch 0: AppleIntelSKLGraphicsFramebuffer (Disable minStolenSize less or equal fStolenMemorySize assertion, 10.11.4 ( (based on Austere.J patch)) :: patch disabled, skipped
2:600 0:000 KextsToPatch 1: IOAHCIBlockStorage (Enable TRIM for SSD) :: patch disabled, skipped
2:600 0:000 KextsToPatch 2: IOGraphicsFamily (Boot graphics glitch, 10.10.x/10.11.x (credit lisai9093, cecekpawon)) :: patch disabled, skipped
2:600 0:000 found 7 volumes with blockIO
2:600 0:000 0. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)
2:600 0:000 1. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Unit(0x1)
2:600 0:000 2. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)\HD(1,GPT,D1278810-BB0E-4068-9786-6AB689771EAA,0x800,0x40000)
2:600 0:000 3. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)\HD(2,GPT,5977141D-3A10-475F-A546-4F85DE3E13F2,0x40800,0x746C5800)
2:600 0:000 Result of bootcode detection: bootable Windows (vista,win)
2:600 0:000 4. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)
2:602 0:001 USB volume
2:602 0:000 5. Volume:
2:602 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000)
2:603 0:001 Result of bootcode detection: bootable unknown (legacy)
2:603 0:000 USB volume
2:603 0:000 This is SelfVolume !!
2:603 0:000 6. Volume:
2:603 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(2,MBR,0x00000000,0x64003,0x1D8F6FD)
2:605 0:001 USB volume
2:605 0:000 Using theme 'Bluemac' (EFI\CLOVER\themes\Bluemac)
2:605 0:000 OS main and drive as badge
2:607 0:002 Choosing theme Bluemac
2:607 0:000 Custom entries start
2:607 0:000 Custom entry 0 skipped because it is disabled.
2:607 0:000 Custom entries finish
2:607 0:000 Scanning loaders...
2:607 0:000 0: 'Whole Disc Boot' no file system
2:607 0:000 1: 'Whole Disc Boot' no file system
2:607 0:000 2: 'Legacy HD1' no file system
2:607 0:000 3: 'Legacy HD2' no file system
2:607 0:000 4: 'Whole Disc Boot' no file system
2:607 0:000 5: 'CLOVER EFI'
2:619 0:011 6: 'Install OS X El Capitan'
2:620 0:001 AddLoaderEntry for Volume Name=Install OS X El Capitan
2:620 0:000 Not match custom entry 0: Type: not match
2:629 0:008 Custom legacy start
2:629 0:000 Custom legacy end
2:629 0:000 Scanning legacy ...
2:629 0:000 0: 'Whole Disc Boot' (legacy) not legacy
2:629 0:000 1: 'Whole Disc Boot' (legacy) not legacy
2:629 0:000 2: 'Legacy HD1' (legacy) not legacy
2:629 0:000 3: 'Legacy HD2' (vista,win) add legacy
2:630 0:000 added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win
2:630 0:000 4: 'Whole Disc Boot' (legacy) not legacy
2:630 0:000 5: 'CLOVER EFI' (legacy) not legacy
2:630 0:000 6: 'Install OS X El Capitan' (legacy) not legacy
2:630 0:000 Custom tool start
2:630 0:000 Custom tool end
2:636 0:005 found tool \EFI\CLOVER\tools\Shell64U.efi
2:637 0:001 GetEfiBootDeviceFromNvram:got efi-boot-device-data size=70
2:638 0:000
2:638 0:000 efi-boot-device-data: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)
2:638 0:000 Volume: 'PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)'
2:638 0:000 LoaderPath: '<null string>'
2:638 0:000 volume: partition = PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)
2:638 0:000 searching for that partition
2:638 0:000 not found
2:638 0:000 searching again, but comparing Media dev path nodes
2:638 0:000 not found
2:638 0:000 Default boot entry not found
2:638 0:000 DefaultIndex=-1 and MainMenu.EntryCount=7
2:638 0:000 Use anime=rotary_logo_bluemac frames=4
4:286 1:648 GUI ready
 
am trying to do this now on my thinkpad p50 and am running into the following error:

0:100 0:100 MemLog inited, TSC freq: 2809625310
0:100 0:000 MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100 0:000
0:100 0:000 Now is 10.7.2016, 18:25:23 (GMT)
0:100 0:000 Starting Clover rev 3599 on Lenovo EFI
0:100 0:000 Build with: [Args: ./ebuild.sh | Command: build -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.11.6 | XCODE: 7.3.1]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000) @5121DF18
0:100 0:000 SelfDirPath = \EFI\BOOT
0:100 0:000 Total Memory Slots Count = 4
0:100 0:000 Type 17 Index = 0
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140522
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 1
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140524
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 2
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140512
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Type 17 Index = 3
0:100 0:000 SmbiosTable.Type17->Speed = 2133MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = Micron
0:100 0:000 SmbiosTable.Type17->SerialNumber = 17140523
0:100 0:000 SmbiosTable.Type17->PartNumber = 16ATF1G64HZ-2G1A2
0:100 0:000 Boot status=0
0:100 0:000 Clover revision: 3599 running on 20ENCTO1WW
0:100 0:000 ... with board 20ENCTO1WW
0:100 0:000 CPU Vendor = 756E6547 Model=506E3
0:100 0:000 got cores from CPUID_1 = 0
0:100 0:000 The CPU supported turbo
0:100 0:000 BrandString = Intel(R) Xeon(R) CPU E3-1505M v5 @ 2.80GHz
0:100 0:000 TSC/CCC Information Leaf:
0:100 0:000 numerator : 234
0:100 0:000 denominator : 2
0:100 0:000 Calibrated ARTFrequency: 24013891
0:100 0:000 MSR 0xE2 before patch 1E008006
0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on
0:100 0:000 MSR 0xE4 00051814
0:100 0:000 MSR 0xCE 0008083B_F1011C00
0:100 0:000 non-usable FLEX_RATIO = 10000
0:100 0:000 corrected FLEX_RATIO = 0
0:100 0:000 MSR 0x1B0 00000000
0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz
0:100 0:000 Corrected FSBFrequency=100MHz
0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100 0:000 Family/ExtFamily: 0x6/0x0
0:100 0:000 MaxDiv/MinDiv: 28.0/8
0:100 0:000 Turbo: 33/34/35/37
0:100 0:000 Features: 0xBFEBFBFF
0:100 0:000 Threads: 8
0:100 0:000 Cores: 4
0:100 0:000 FSB: 100 MHz
0:100 0:000 CPU: 2800 MHz
0:100 0:000 TSC: 2800 MHz
0:100 0:000 PIS: 400 MHz
0:100 0:000 PCI (00|00:00.00) : 8086 1918 class=060000
0:100 0:000 PCI (00|00:01.00) : 8086 1901 class=060400
0:100 0:000 PCI (00|01:00.00) : 10DE 13B0 class=030000
0:100 0:000 Found NVidia model=Unknown family 1FF
0:100 0:000 PCI (00|00:02.00) : 8086 191D class=030000
0:100 0:000 Found GFX model=Intel HD Graphics P530
0:100 0:000 PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100 0:000 PCI (00|00:14.02) : 8086 A131 class=118000
0:100 0:000 PCI (00|00:16.00) : 8086 A13A class=078000
0:100 0:000 PCI (00|00:16.03) : 8086 A13D class=070002
0:100 0:000 PCI (00|00:17.00) : 8086 A102 class=010601
0:100 0:000 PCI (00|00:1C.00) : 8086 A110 class=060400
0:100 0:000 PCI (00|00:1C.02) : 8086 A112 class=060400
0:100 0:000 PCI (00|04:00.00) : 8086 24F3 class=028000
0:100 0:000 PCI (00|00:1C.04) : 8086 A114 class=060400
0:100 0:000 PCI (00|00:1D.00) : 8086 A118 class=060400
0:100 0:000 PCI (00|3E:00.00) : 144D A802 class=010802
0:100 0:000 PCI (00|00:1D.04) : 8086 A11C class=060400
0:100 0:000 PCI (00|3F:00.00) : 10EC 525A class=FF0000
0:100 0:000 PCI (00|00:1F.00) : 8086 A150 class=060100
0:100 0:000 PCI (00|00:1F.02) : 8086 A121 class=058000
0:100 0:000 PCI (00|00:1F.03) : 8086 A170 class=040300
0:100 0:000 PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100 0:000 PCI (00|00:1F.06) : 8086 15B7 class=020000
0:100 0:000 LAN 0, Vendor=8086, MMIO=D5800000
0:100 0:000 Clover load options size = 0 bytes
0:119 0:019 Using OEM config.plist at path: EFI\CLOVER\config.plist
0:120 0:000 EFI\CLOVER\config.plist loaded: Success
0:120 0:000 Found theme directory: embedded
0:126 0:005 Found theme directory: random
0:131 0:005 Found theme directory: bluemac
0:147 0:015 Loading early settings
0:147 0:000 timeout set to 5
0:147 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:147 0:000 ForceKextsToLoad: 1 requested
0:147 0:000 ForceKextsToLoad 0: System\Library\Extensions\IONetworkingFamily.kext
0:147 0:000 KextsToPatch: 3 requested
0:147 0:000 KextsToPatch 0: AppleIntelSKLGraphicsFramebuffer (Disable minStolenSize less or equal fStolenMemorySize assertion, 10.11.4 ( (based on Austere.J patch)) :: patch disabled, skipped
0:147 0:000 KextsToPatch 1: IOAHCIBlockStorage (Enable TRIM for SSD) :: patch disabled, skipped
0:147 0:000 KextsToPatch 2: IOGraphicsFamily (Boot graphics glitch, 10.10.x/10.11.x (credit lisai9093, cecekpawon)) :: patch disabled, skipped
0:147 0:000 Default theme: Bluemac
0:147 0:000 ** Warning: unknown custom entry Type 'Other'
0:147 0:000 LoadDrivers() start
0:152 0:005 Loading HFSPlus.efi status=Success
0:165 0:013 - driver needs connecting
0:165 0:000 Loading FSInject-64.efi status=Success
0:168 0:002 Loading OsxFatBinaryDrv-64.efi status=Success
0:175 0:007 Loading DataHubDxe-64.efi status=Success
0:196 0:020 Loading OsxAptioFixDrv-64.efi status=Success
0:199 0:002 1 drivers needs connecting ...
0:199 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:199 0:000 HFS+ driver loaded
0:199 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:544 0:345 LoadDrivers() end
0:544 0:000 Dump SMC keys from NVRAM:
0:593 0:049 SetMaxResolution: found best mode 3: 3840x2160
2:524 1:930 Video mode change to mode #3: Success
2:524 0:000 - set
2:524 0:000 Console modes reported: 5, available modes:
2:524 0:000 Mode 1: 80x25 (current mode)
2:524 0:000 Mode 3: 128x40
2:524 0:000 Mode 4: 100x31
2:524 0:000 Mode 5: 480x113
2:524 0:000 SetScreenResolution: 3840x2160 - already set
2:524 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000)
2:524 0:000 MAC address of LAN #0= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #1= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #2= 50:7B:9D:AF:E8:28:
2:524 0:000 MAC address of LAN #3= 50:7B:9D:AF:E8:28:
2:524 0:000 ScanSPD() start
2:525 0:000 SMBus device : 8086 A123 class=0C0500 status=Success
2:525 0:000 SMBus CmdReg: 0x1
2:525 0:000 Scanning SMBus [8086:A123], mmio: 0xD584D004, ioport: 0xEFA0, hostc: 0x1
2:525 0:000 Slots to scan [8]...
2:525 0:000 SPD[0]: Type 12 @0x50
2:543 0:017 Unknown vendor bank=0x80 code=0x2C
2:543 0:000 Not using XMP because it is not present
2:543 0:000 DDR speed 2132MHz
2:543 0:000 Slot: 0 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050E04
2:544 0:000 SPD[1]: Type 12 @0x51
2:562 0:017 Unknown vendor bank=0x80 code=0x2C
2:562 0:000 Not using XMP because it is not present
2:562 0:000 DDR speed 2132MHz
2:562 0:000 Slot: 1 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050F01
2:562 0:000 SPD[2]: Type 12 @0x52
2:580 0:017 Unknown vendor bank=0x80 code=0x2C
2:580 0:000 Not using XMP because it is not present
2:580 0:000 DDR speed 2132MHz
2:580 0:000 Slot: 2 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E0005070E
2:581 0:000 SPD[3]: Type 12 @0x53
2:598 0:017 Unknown vendor bank=0x80 code=0x2C
2:598 0:000 Not using XMP because it is not present
2:598 0:000 DDR speed 2132MHz
2:598 0:000 Slot: 3 Type 26 8192MB 2132MHz Vendor=NoName PartNo=16ATF1G64HZ-2G1A2 SerialNo=0101080E00050E0B
2:599 0:000 ScanSPD() end
2:599 0:000 Get Acpi Tables List from RSDT:
2:599 0:000 Found table: FACP TP-N1E len=244
2:599 0:000 Found table: TCPA TP-N1E len=50
2:599 0:000 Found table: SSDT Tpm2Tabl len=1207
2:599 0:000 Found table: SSDT MeSsdt len=75
2:599 0:000 Found table: TPM2 TP-N1E len=52
2:599 0:000 Found table: UEFI TP-N1E len=66
2:599 0:000 Found table: SSDT SaSsdt len=20851
2:599 0:000 Found table: SSDT PerfTune len=1477
2:599 0:000 Found table: ECDT TP-N1E len=82
2:599 0:000 Found table: HPET TP-N1E len=56
2:599 0:000 Found table: APIC TP-N1E len=188
2:599 0:000 Found table: MCFG TP-N1E len=60
2:599 0:000 Found table: SSDT SataAhci len=5834
2:599 0:000 Found table: DBGP TP-N1E len=52
2:599 0:000 Found table: DBG2 TP-N1E len=84
2:599 0:000 Found table: BOOT TP-N1E len=40
2:599 0:000 Found table: BATB TP-N1E len=70
2:599 0:000 Found table: SLIC TP-N1E len=374
2:599 0:000 Found table: SSDT CpuSsdt len=3699
2:599 0:000 Found table: SSDT CtdpB len=1027
2:599 0:000 Found table: MSDM TP-N1E len=85
2:599 0:000 Found table: SSDT NvOptTbl len=4044
2:599 0:000 Found table: SSDT SgPeg len=108
2:599 0:000 Found table: ASF! TP-N1E len=165
2:599 0:000 Found table: FPDT TP-N1E len=68
2:599 0:000 Found table: UEFI TP-N1E len=298
2:599 0:000 Calibrated TSC frequency =2809625310 =2809MHz
2:599 0:000 Loading main settings
2:599 0:000 USB FixOwnership: true
2:599 0:000 Dropping 2 tables
2:599 0:000 Drop table 0 signature="MCFG" (4746434D)
2:599 0:000 set table: 4746434D, 0 to drop: true
2:599 0:000
2:599 0:000 Drop table 1 signature="DMAR" (52414D44)
2:599 0:000 set table: 52414D44, 0 to drop:
2:599 0:000 Config set Fixes will override FixMask mask!
2:599 0:000 final mask=80000000
2:599 0:000 PatchesDSDT: 6 requested
2:599 0:000 patch disabled, skipped
2:599 0:000 DSDT bin patch #1 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #2 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #3 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #4 lenToFind=4 lenToReplace=4
2:599 0:000 DSDT bin patch #5 lenToFind=4 lenToReplace=4
2:599 0:000 Config set PluginType=1
2:600 0:000 ForceKextsToLoad: 1 requested
2:600 0:000 ForceKextsToLoad 1: System\Library\Extensions\IONetworkingFamily.kext
2:600 0:000 KextsToPatch: 3 requested
2:600 0:000 KextsToPatch 0: AppleIntelSKLGraphicsFramebuffer (Disable minStolenSize less or equal fStolenMemorySize assertion, 10.11.4 ( (based on Austere.J patch)) :: patch disabled, skipped
2:600 0:000 KextsToPatch 1: IOAHCIBlockStorage (Enable TRIM for SSD) :: patch disabled, skipped
2:600 0:000 KextsToPatch 2: IOGraphicsFamily (Boot graphics glitch, 10.10.x/10.11.x (credit lisai9093, cecekpawon)) :: patch disabled, skipped
2:600 0:000 found 7 volumes with blockIO
2:600 0:000 0. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)
2:600 0:000 1. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Unit(0x1)
2:600 0:000 2. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)\HD(1,GPT,D1278810-BB0E-4068-9786-6AB689771EAA,0x800,0x40000)
2:600 0:000 3. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0x0,0x0)\HD(2,GPT,5977141D-3A10-475F-A546-4F85DE3E13F2,0x40800,0x746C5800)
2:600 0:000 Result of bootcode detection: bootable Windows (vista,win)
2:600 0:000 4. Volume:
2:600 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)
2:602 0:001 USB volume
2:602 0:000 5. Volume:
2:602 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(1,MBR,0x00000000,0x2,0x64000)
2:603 0:001 Result of bootcode detection: bootable unknown (legacy)
2:603 0:000 USB volume
2:603 0:000 This is SelfVolume !!
2:603 0:000 6. Volume:
2:603 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x5,0x0)\HD(2,MBR,0x00000000,0x64003,0x1D8F6FD)
2:605 0:001 USB volume
2:605 0:000 Using theme 'Bluemac' (EFI\CLOVER\themes\Bluemac)
2:605 0:000 OS main and drive as badge
2:607 0:002 Choosing theme Bluemac
2:607 0:000 Custom entries start
2:607 0:000 Custom entry 0 skipped because it is disabled.
2:607 0:000 Custom entries finish
2:607 0:000 Scanning loaders...
2:607 0:000 0: 'Whole Disc Boot' no file system
2:607 0:000 1: 'Whole Disc Boot' no file system
2:607 0:000 2: 'Legacy HD1' no file system
2:607 0:000 3: 'Legacy HD2' no file system
2:607 0:000 4: 'Whole Disc Boot' no file system
2:607 0:000 5: 'CLOVER EFI'
2:619 0:011 6: 'Install OS X El Capitan'
2:620 0:001 AddLoaderEntry for Volume Name=Install OS X El Capitan
2:620 0:000 Not match custom entry 0: Type: not match
2:629 0:008 Custom legacy start
2:629 0:000 Custom legacy end
2:629 0:000 Scanning legacy ...
2:629 0:000 0: 'Whole Disc Boot' (legacy) not legacy
2:629 0:000 1: 'Whole Disc Boot' (legacy) not legacy
2:629 0:000 2: 'Legacy HD1' (legacy) not legacy
2:629 0:000 3: 'Legacy HD2' (vista,win) add legacy
2:630 0:000 added 'Boot Windows from Legacy HD2' OSType=2 Icon=vista,win
2:630 0:000 4: 'Whole Disc Boot' (legacy) not legacy
2:630 0:000 5: 'CLOVER EFI' (legacy) not legacy
2:630 0:000 6: 'Install OS X El Capitan' (legacy) not legacy
2:630 0:000 Custom tool start
2:630 0:000 Custom tool end
2:636 0:005 found tool \EFI\CLOVER\tools\Shell64U.efi
2:637 0:001 GetEfiBootDeviceFromNvram:got efi-boot-device-data size=70
2:638 0:000
2:638 0:000 efi-boot-device-data: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)
2:638 0:000 Volume: 'PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)'
2:638 0:000 LoaderPath: '<null string>'
2:638 0:000 volume: partition = PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,MBR,0x0000D82F,0x1000,0x64000)
2:638 0:000 searching for that partition
2:638 0:000 not found
2:638 0:000 searching again, but comparing Media dev path nodes
2:638 0:000 not found
2:638 0:000 Default boot entry not found
2:638 0:000 DefaultIndex=-1 and MainMenu.EntryCount=7
2:638 0:000 Use anime=rotary_logo_bluemac frames=4
4:286 1:648 GUI ready
 
i did - unfortunately does't work, so i gave up.
 
BJK2142 said:
i did - unfortunately does't work, so i gave up.
Click to expand...

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Note: It appears you didn't read the guide... as your profile is not filled out per request in the guide.
 
I have made some progress. After many attempts of both vanilla install and unibeast, vanilla i would get "An error occured while preparing for installation. Try restarting the application." For unibest install I would get the bless tool error as said earlier by spadewkun. I descided to install it through my desktop and then boot with clover usb on the thinkpad. Ive able to get dsmos to arrive. Now I'm at black screen with cursor being able to move. Ill look more into getting the graphics working somehow soon..

Not sure if you guys gave up or are just waiting for more skylake stuff from apple but any of you with a P50 that want to get to at least this point, let me know and ill try to help out and provide kexts and config I am using.
-c
 
11orourkec said:
I have made some progress. After many attempts of both vanilla install and unibeast, vanilla i would get "An error occured while preparing for installation. Try restarting the application." For unibest install I would get the bless tool error as said earlier by spadewkun. I descided to install it through my desktop and then boot with clover usb on the thinkpad. Ive able to get dsmos to arrive. Now I'm at black screen with cursor being able to move. Ill look more into getting the graphics working somehow soon..

Not sure if you guys gave up or are just waiting for more skylake stuff from apple but any of you with a P50 that want to get to at least this point, let me know and ill try to help out and provide kexts and config I am using.
-c
Click to expand...

With the hardware in your profile (XEON CPU), you should research similar desktop systems, as you're in for quite a bit of work..
 
I have gotten to the installer:

- use clover, as described
- use the 530 laptop playlist config file as your base config file
- use clover configurator and use the fakeCPUID (similar method to get the 6950x working)

now my issue is the installer does its thing and then has the following error
Untitled.jpg
 
I have just got my new P50. The spec is simpler and hopefully more straight forward.
P50
CPU: i7-6820HQ
Graphic: Intel HD 530 + NVidia M1000M

I'm wondering if I will be abel to install El Capitan on this machine. I'm running 10.11.6 successfully on my old T420.

Is there any chance to get this CPU and NVidia working with macosx?
Where do I start?

Please help.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top