Going Bald
Moderator
- Joined
- Aug 14, 2010
- Messages
- 22,392
- Motherboard
- GA-X58A-UD7-F7
- CPU
- W3670
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
This method is for using a legacy boot loader. I do not want to use this. I want to use an EFI boot loader such as clover.
Principal is the same. Best is to use a USB flash drive and install Clover to it. Get the config.plist and everything else working correctly and it is booting to the drive.
Open terminal, use diskutil list to ID the drives. You should see your HDD, your individual RAID0 drives and your combined RAID0 drive.
Clone your HDD install to the combined RAID0 drive with CCC or SuperDuper or your favorite clone program.
Install Clover to each of the individual RAID0 drives, one at a time. when you install Clover, it mounts the EFI partition. Open the partition in finder and copy the EFI folder from your USB drive to the EFI partition of each of the RAID0 drives.
Once you have completed this you can eject the USB, reboot, and select the RAID0 icon at the Clover boot screen.