RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
I used MBR with a FAT32 partition for Clover and a separate HFS+J partition for the OS X installer
I used 'diskutil' in Terminal to determinate what the disk identifier is.
I used option 1 with my disk identifier
# repartition /dev/disk1 MBR, two partitions
# first partition, "CLOVER EFI" FAT32, 200MiB
# second partition, "install_osx", HFS+J, remainder
diskutil partitionDisk /dev/disk1 2 MBR FAT32 "CLOVER EFI" 200Mi HFS+J "install_osx" R
Then install Clover in CLOVER EFI partition and customized in this way:
1 Install for UEFI booting only" --> unchecked
2"Install Clover in the ESP" --> unchecked
3 In "Bootloader", I checked "Install boot0ss in MBR" [the first time because i want to do a dual boot with Windows 10 pro]
But i have the "bf1 init5" error then I retried with "Install boot0af in MBR" but, at the end of all, when i boot i have obteined the same error
4 Clover Efi 64 bits sata chched
5 bluemac in themes checked
6 downloaded after clicking raw "config_HD3000_1600x900.plist" because i have intel HD graphics 3000 and 1920x1080 resolution
7 renamed in config.plist and replaced the original plist file
8 Add the kexts: FakeSMC.kext, FakeSMC.kext, GenericUSBXHCI.kext, RealtekRTL8111.kext (i have "Realtek PCIe GBE Family Controller")
9 Then i used createinstallmedia method tocreate a USB installer
10 disabilite virtualization in bios
At the end when i boot with usb, (tried in all available usb ports)
I receive this: "bf1 init5" and i cannot continue.
http://clover-wiki.zetam.org/FAQ