- Joined
- Apr 1, 2013
- Messages
- 421
- Motherboard
- Dell XPS 13 (9360)
- CPU
- i7-8550u (8th Generation) Kalby Lake - R
- Graphics
- Intel UHD 620
- Mac
In the past attempts, MBR choice resulted in a partition table boot error. Not sure what to do.
In the past attempts, MBR choice resulted in a partition table boot error. Not sure what to do.
...I have no clue on why the firmware was loaded once, BrcmPatcheRAM seems not get started for other runs.
Also two questions for RehabMan: I am also using your VoodooPS2Controller. Does it support tap to click? Seems there is a fork of your VoodooPS2Controller to support Cypress PS2 touchpad (https://code.google.com/p/voodoops2controllercypress/), but I could not download it at the pointed URL. Did you include the change made there?
Also DPCIManager has a function to extract DSDT. Can we use this extracted DSDT the same like the one extracted from Ubuntu?
BrcmPatchRAM only loads firmware when the device has no firmware already on it. This means: on cold boot, and wake from sleep. Any restart from a "firmware loaded" state results in using the firmware already resident.
Tap to click is supported on Synaptics if enabled in SysPrefs->Trackpad.
I did every boot after shutdown. There is no Windows or Linux installed on the machine.
Also what would be the likely cause of USB2 device not working? Should I install your GenericUSBXHCI kext from last October?
Check to see if the device is on the USB bus.
GenericUSBXHCI.kext should be avoided.
Try with FakePCIID.kext and FakePCIID_XHCIMux.kext.
Also, try config.plist/Devices/USB/FixOwnership=true.
Tried both, no luck with USB 2.
For those who had USB 2 and bluetooth working, would you share your BIOS configuration, config.plist and any kexts?
Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.