- Joined
- Jun 29, 2015
- Messages
- 47
- Motherboard
- Intel NUC5i3RYh
- CPU
- i3
- Graphics
- hd 5500
- Mac
- Classic Mac
- Mobile Phone
where did you get multibeast 3.3? only 3.1 is available on the d/l page for snow leopard...
EDIT
Here is my org.chameleon.Boot.plist from a Dell Optiplex 760, Bios A02 running Snow Leopard 10.6.8 with an Intel E8400 processor and Asus EAH5570 GPU.
I have highlighted in Bold text the additional information that pertains to my board. Your text will be similar in nature but not identical.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>device-properties</key>
<string>450000000100000001000000390000000100000002010c00d041030a040000000101060000197fff0400160000006200750069006c0074002d0069006e0000000500000001</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386 npci=0x2000</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
</dict>
</plist>
You can use text edit in your Applications folder to add this or download Text Wrangler. Remember to Save before closing.
http://www.tonymacx86.com/basics/138280-os-x-configuration-tuning-utility-tools.html
intel core 2 duo 2.33 ghtz ati raedon HD 2400. my thernet works fine. the problem i amm having is with installing a boot loader that works. multibeast reports it is installed but then it doesn't boot.
i have no idea what i am supposed to do with that.
what i need is a boot loader that actually works.
i dont get any options to add any options because after installing multibeast and using the esay beast option, i dont get to see the boot loader beacause it doesn't load
The boot loader works. Thousands of people have used it with similar hardware - it is tried and tested. What HDD/SSD are you using? Please give exact make model - trying to figure if you are using a 4k drive that gets the boot0 error with a traditional boot loader.
http://www.tonymacx86.com/general-help/65706-boot0-error-official-guide.html
Thanks! how do i do that i wonder using unibeast with a snowleopard dvd?