Crashes after update to MacOS12.2.1

[luc1970]

I successfully updated to MacOS12.2.1, but having frequent crashes now. That is the crash log from MacOS, maybe someone has an idea ?





panic(cpu 4 caller 0xffffff800d1d5bf3): Kernel trap at 0xffffff800d1cc0ed, type 14=page fault, registers:


CR0: 0x0000000080010033, CR2: 0xffffff80138dc7b8, CR3: 0x000000044d82a068, CR4: 0x00000000003626e0


RAX: 0x0000000000840000, RBX: 0xffffff80138dc7b0, RCX: 0x0000000000840000, RDX: 0x0000000003840000


RSP: 0xffffffd089383c68, RBP: 0xffffffd089383c80, RSI: 0xffffff80138dc7b0, RDI: 0xffffff80138dc7b0


R8: 0x0000000000000016, R9: 0x0000000000000002, R10: 0xffffff86959120c0, R11: 0xffffff800d9e3173


R12: 0xffffff800e0856f8, R13: 0x00000000e00002bd, R14: 0xffffff8697217000, R15: 0xffffff99c8b6cc7c


RFL: 0x0000000000010202, RIP: 0xffffff800d1cc0ed, CS: 0x0000000000000008, SS: 0x0000000000000010


Fault CR2: 0xffffff80138dc7b8, Error code: 0x0000000000000003, Fault CPU: 0x4, PL: 1, VF: 5





Panicked task 0xffffff8695a04090: 3 threads: pid 74: systemstats


Backtrace (CPU 4), panicked thread: 0xffffff8697217000, Frame : Return Address


0xffffffd089383690 : 0xffffff800d085ffd mach_kernel : _handle_debugger_trap + 0x41d


0xffffffd0893836e0 : 0xffffff800d1e6035 mach_kernel : _kdp_i386_trap + 0x145


0xffffffd089383720 : 0xffffff800d1d5803 mach_kernel : _kernel_trap + 0x533


0xffffffd089383770 : 0xffffff800d025a60 mach_kernel : _return_from_trap + 0xe0


0xffffffd089383790 : 0xffffff800d0863cd mach_kernel : _DebuggerTrapWithState + 0xad


0xffffffd0893838b0 : 0xffffff800d085b86 mach_kernel : _panic_trap_to_debugger + 0x2b6


0xffffffd089383910 : 0xffffff800d916409 mach_kernel : _panic + 0x54


0xffffffd089383980 : 0xffffff800d1d5bf3 mach_kernel : _sync_iss_to_iks + 0x2c3


0xffffffd089383b00 : 0xffffff800d1d58d8 mach_kernel : _kernel_trap + 0x608


0xffffffd089383b50 : 0xffffff800d025a60 mach_kernel : _return_from_trap + 0xe0


0xffffffd089383b70 : 0xffffff800d1cc0ed mach_kernel : _IOLockLock + 0x1d


0xffffffd089383c80 : 0xffffff800fbf4d96 com.apple.iokit.IOPCIFamily : __ZNK11IOPCIDevice11getPropertyEPK8OSSymbol + 0x5e


0xffffffd089383cc0 : 0xffffff800d81f0f4 mach_kernel : __ZNK15IORegistryEntry11getPropertyEPKc + 0x24


0xffffffd089383ce0 : 0xffffff800d81f60f mach_kernel : __ZNK15IORegistryEntry12copyPropertyEPKc + 0x4f


0xffffffd089383d10 : 0xffffff800d892228 mach_kernel : _is_io_registry_entry_get_property_bin_buf + 0x128


0xffffffd089383d80 : 0xffffff800d18f5ac mach_kernel : _iokit_server_routine + 0x738c


0xffffffd089383dd0 : 0xffffff800d061048 mach_kernel : _ipc_kmsg_send + 0x468


0xffffffd089383e60 : 0xffffff800d077a8d mach_kernel : _mach_msg_overwrite_trap + 0x2bd


0xffffffd089383ef0 : 0xffffff800d1b8f7e mach_kernel : _mach_call_munger64 + 0x22e


0xffffffd089383fa0 : 0xffffff800d026246 mach_kernel : _hndl_mach_scall64 + 0x16


Kernel Extensions in backtrace:


com.apple.iokit.IOPCIFamily(2.9)[897B72E0-B98F-30BA-8CB2-4E5E469CE4B6]@0xffffff800fbe7000->0xffffff800fc11fff





Process name corresponding to current thread (0xffffff8697217000): systemstats


Boot args: keepsyms=1 debug=0x100 igfxonln=1 chunklist-security-epoch=0 -chunklist-no-rev2-dev





Mac OS version:


21D62





Kernel version:


Darwin Kernel Version 21.3.0: Wed Jan 5 21:37:58 PST 2022; root:xnu-8019.80.24~20/RELEASE_X86_64


Kernel UUID:


KernelCache slide: 0x000000000ce00000


KernelCache base: 0xffffff800d000000


Kernel slide: 0x000000000ce10000


Kernel text base: 0xffffff800d010000


__HIB text base: 0xffffff800cf00000


System model name: iMac20,1


System shutdown begun: NO


Panic diags file available: YES (0x0)


Hibernation exit count: 0





System uptime in nanoseconds: 618790941896


Last Sleep: absolute base_tsc base_nano


Uptime : 0x0000009012d07c9b


Sleep : 0x00000026218bd5f3 0x0000000e691a5d68 0x0000000000000000


Wake : 0x000000262f332bd6 0x000000019eeb956c 0x000000262dfdd1fa


Zone info:


Foreign : 0xffffff80170c3000 - 0xffffff80170d0000


Native : 0xffffff802f1ab000 - 0xffffffa02f1ab000


Readonly : 0xffffff84fbe77000 - 0xffffff869580b000


Metadata : 0xfffffff2516b8000 - 0xfffffff271839000


Bitmaps : 0xfffffff271839000 - 0xfffffff277839000

 

[luc1970]

My Configuration:
OpenCore 0.7.9
iMac20,1
Asus B460-I mainboard
16 GB 2133 MHz DDR4
AMD Radeon RX 6600 XT 8 GB

 

[luc1970]

I solved this problem by using an EFI from Githib, that someone posted there for this mainboard and Monterey. I just added the kexts for my WLAN/Bluetooth card and my own USB map.
But now I have the problem that after each restart, I get the message 'The system has POSTed in safe mode' . After a reset, is boots normally into MacOS again, but I have problems starting into Windows, this only worked when I changed the boot device from the MacOS EFI partition to the Windows boot partiton (so not using OpenCore to boot windows).

 

[Middleman]

I solved this problem by using an EFI from Githib, that someone posted there for this mainboard and Monterey. I just added the kexts for my WLAN/Bluetooth card and my own USB map.
But now I have the problem that after each restart, I get the message 'The system has POSTed in safe mode' . After a reset, is boots normally into MacOS again, but I have problems starting into Windows, this only worked when I changed the boot device from the MacOS EFI partition to the Windows boot partiton (so not using OpenCore to boot windows).

You could have a look at my Z490 Monterey build here and see if it helps, although I am using OC 0.6.8. Technically it should work with yours too. Just select the Monterey AMD version of the EFI. But you may need to change the AAPL,ig-platform-id and device-id of the Intel IGPU PCI root device properties to C89B0000 and 00009BC8 > https://www.tonymacx86.com/threads/...-aorus-xtreme-core-i5-10500-i9-10900k.317244/

For the Windows bootup, you'll need to apply this fix from Dortania > https://dortania.github.io/OpenCore-Multiboot/oc/win.html

 

[luc1970]

You could have a look at my Z490 Monterey build here and see if it helps, although I am using OC 0.6.8. Technically it should work with yours too. Just select the Monterey AMD version of the EFI. But you may need to change the AAPL,ig-platform-id and device-id of the Intel IGPU PCI root device properties to C89B0000 and 00009BC8 > https://www.tonymacx86.com/threads/...-aorus-xtreme-core-i5-10500-i9-10900k.317244/

For the Windows bootup, you'll need to apply this fix from Dortania > https://dortania.github.io/OpenCore-Multiboot/oc/win.html

Thanks, I'll try that
Regarding the problem with windows - that is a misunderstanding: I see windows in Open Core and can boot it, but it results in a blue screen with the message 'ACPI BIOS error'. I could overcome this by booting windows directly. Since this never happened before, I guess this is a result of the 'POSTed in safe mode' issue.

 

[luc1970]

Still having the 'The system has POSTed in safe mode', also with your EFI. Did't have that with my original EFI that worked fine in Big Sur, but unfortunately led to crashes in Monterey.

 

[Middleman]

Still having the 'The system has POSTed in safe mode', also with your EFI. Did't have that with my original EFI that worked fine in Big Sur, but unfortunately led to crashes in Monterey.

I think I know why. It's possible my EFI is a little outdated now because of the OC. If you are running the latest Monterey I'm afraid there could be issues.

In any case I thought maybe you could have a look at this build, reason being it is ASUS Z490 specific (my Gigabyte board has some differences), so should be more up your alley. It also uses OC 0.7.5. so is quite up to date. > https://github.com/jergoo/Hackintosh-ROG-STRIX-Z490I