- Joined
- Feb 5, 2013
- Messages
- 2
- Motherboard
- Hackintosh
- CPU
- Intel Core i3-4130 3.4 Ghz
- Graphics
- Nvidia GTX 750 TI EVGA Superclocked edition
- Mac
- Classic Mac
- Mobile Phone
Hello! I have successfully installed El Capitan on my custom-built PC! (Parts are up-to-date on my profile) I've got everything working (graphics card, audio, etc.)
However, there is one big problem I've been dealing with for the past couple of days...
Quite often when I'm attempting to boot, I'll wait an incredibly long time at the progress bar (longest I've waited is 15 minutes!) then I'll do a hard reboot, and instead boot using clover on the installer thumb-drive I made with Unibeast.
After successfully getting back into my OS via the thumb-drive I'll reinstall clover using Multibeast. The new installation of clover will work once or twice, then it will stop working again.
I tried booting using -v (Verbose Mode) and the point at which it would hang was after several of these lines:
ATHR: Unknown Locale 21
Earlier, I followed this guide: http://www.tonymacx86.com/network/148852-solved-how-get-rid-athr-unknown-locale-21-errors.html
After doing that I was able to boot about three times, then it quit working again.
Now It hangs after these lines:
16.914710: apple80211Request[10514] Unsupported ioctl 156
16.920204: apple80211Request[10514] Unsupported ioctl 181
16.925618: apple80211Request[10514] Unsupported ioctl 156
16.930816: apple80211Request[10514] Unsupported ioctl 181
16.935831: apple80211Request[10514] Unsupported ioctl 156
16.940799: apple80211Request[10514] Unsupported ioctl 181
en0: BSSID changed to 50:6a:03:a7:e0:ed
en0: channel changed to 48,-1
en0::IO80211Interface:ostMessage bssid changed
16.960164: apple80211Request[10514] Unsupported ioctl 230
AirPort: RSN handshake complete on en0
16.982338: setWOW_PARAMETERS:wowevents = 2(1)
Sandbox: mDNSResponder(91) deny(1) file-read-data /Library/Application Support/CrashReporter/SubmitDiagInfo.domains
hfs: unmount initialized on Recovery HD on device disk1s3
**** [IOBluetoothFamily][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
Again, I can boot fine from my USB Stick I used for the installation. It's just the clover install on my EFI partition of my Macintosh HD drive that randomly quits on me!
All help will be greatly appreciated!
Thanks,
Matt
However, there is one big problem I've been dealing with for the past couple of days...
Quite often when I'm attempting to boot, I'll wait an incredibly long time at the progress bar (longest I've waited is 15 minutes!) then I'll do a hard reboot, and instead boot using clover on the installer thumb-drive I made with Unibeast.
After successfully getting back into my OS via the thumb-drive I'll reinstall clover using Multibeast. The new installation of clover will work once or twice, then it will stop working again.
I tried booting using -v (Verbose Mode) and the point at which it would hang was after several of these lines:
ATHR: Unknown Locale 21
Earlier, I followed this guide: http://www.tonymacx86.com/network/148852-solved-how-get-rid-athr-unknown-locale-21-errors.html
After doing that I was able to boot about three times, then it quit working again.
Now It hangs after these lines:
16.914710: apple80211Request[10514] Unsupported ioctl 156
16.920204: apple80211Request[10514] Unsupported ioctl 181
16.925618: apple80211Request[10514] Unsupported ioctl 156
16.930816: apple80211Request[10514] Unsupported ioctl 181
16.935831: apple80211Request[10514] Unsupported ioctl 156
16.940799: apple80211Request[10514] Unsupported ioctl 181
en0: BSSID changed to 50:6a:03:a7:e0:ed
en0: channel changed to 48,-1
en0::IO80211Interface:ostMessage bssid changed
16.960164: apple80211Request[10514] Unsupported ioctl 230
AirPort: RSN handshake complete on en0
16.982338: setWOW_PARAMETERS:wowevents = 2(1)
Sandbox: mDNSResponder(91) deny(1) file-read-data /Library/Application Support/CrashReporter/SubmitDiagInfo.domains
hfs: unmount initialized on Recovery HD on device disk1s3
**** [IOBluetoothFamily][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
Again, I can boot fine from my USB Stick I used for the installation. It's just the clover install on my EFI partition of my Macintosh HD drive that randomly quits on me!
All help will be greatly appreciated!
Thanks,
Matt