BT and Airdrop not working - Migration from Clover to Opencore - BIG SUR

[Adiscz]

Hi,

after converting to opencore from clover an installing Big Sur. I have problems with bluetooth and airdrop connection.

When there was clover bootloader and i was loading opencore bootloader from flashdrive - everything was working normally. But after deleting clover and copying EFI from USB stick to SSD EFI - Bluetooth stopped working/airdrop also.

AIRDROP - I can see other devices but when i pres to send it does nothing.

Bluetooth is showing in prefference pane and i can see that bluetooth is turned on.

Also apple keyboard says when i connect it with cable, that the keyboard is now connected via bluetooth, but after removing cable it's not working.

Motherboard: GIGABYTE Z390 DESIGNARE
CPU: Intel Core i9-9900K Coffee Lake refresh
Network Card: FV-T919

I can see that bluetooth driver is installed:

EFI:

latest opencore log

00:000 00:000 OC: Nested ReRun is not supported
00:022 00:022 OC: Boot failed - Already started
00:035 00:013 OCB: StartImage failed - Already started
13:477 13:441 AAPL: #[EB|LOG:INIT] 2021-01-20T10:34:08
13:496 00:019 AAPL: #[EB|VERSION] <"boot.efi 495.60.1~4 (Official), built 2020-11-23T06:24:48-0800">
13:509 00:012 AAPL: #[EB|BUILD] <"BUILD-INFO[296]:{"DisplayName":"boot.efi","DisplayVersion":"495.60.1~4","RecordUuid":"03CF57CA-3D51-4B97-BB17-0A939346620A","BuildTime":"2020-11-23T06:24:48-0800","ProjectName":"efiboot","ProductName":"boot.efi","SourceVersion":"495.60.1","BuildVersion":"4","BuildConfiguration":"Release","BuildType":"Official"}">
13:524 00:014 AAPL: #[EB|CFGEV] r2 0x0 0x0
13:537 00:013 AAPL: #[EB|H:IS] 0
13:550 00:013 AAPL: #[EB|WL:MODE] 0
13:563 00:012 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default
13:576 00:013 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default
13:589 00:012 AAPL: #[EB|CFG:ARG] console 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default
15:002 01:412 AAPL: #[EB|CFG:ARG] serial 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) default
15:014 00:012 AAPL: #[EB|CFG:ARG] embed-log-dt 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) default
15:027 00:012 AAPL: #[EB|CFG:ARG] timestamps 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default
15:040 00:012 AAPL: #[EB|CFG:ARG] log-level 0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default
15:053 00:012 AAPL: #[EB|CFG:ARG] breakpoint 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default
15:066 00:012 AAPL: #[EB|CFG:ARG] kc-read-size 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default
15:080 00:014 AAPL: #[EB|H:IS] 0
15:094 00:013 AAPL: #[EB|WL] 0 0 0x01 0x01 0 0x00
15:107 00:013 AAPL: #[EB|BRD:NV] Mac-AA95B1DDAB278B95
15:120 00:012 AAPL: #[EB|WL] 0 0 0x01 0x01 2 0x00
15:134 00:013 AAPL: #[EB.BST.IDT|+]
15:147 00:013 AAPL: #[EB.BST.IDT|-]
15:161 00:013 AAPL: #[EB|WL] 0 0 0x01 0x01 3 0x00
15:173 00:012 AAPL: #[EB|WL] 0 0 0x01 0x01 4 0x00
15:187 00:013 AAPL: #[EB|BRD:NV] Mac-AA95B1DDAB278B95
15:199 00:012 AAPL: #[EB|WL] 0 0 0x01 0x01 5 0x00
15:213 00:013 AAPL: #[EB.H.CHK|BM] 0x0000000000000000
15:225 00:012 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:240 00:014 AAPL: #[EB|WL] 0 0 0x01 0x01 23 0x0E
15:253 00:013 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:266 00:013 AAPL: #[EB|WL] 0 0 0x01 0x01 24 0x0E
15:279 00:012 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:292 00:012 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:305 00:012 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:319 00:014 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82
15:332 00:012 AAPL: #[EB|H:NOT]
15:345 00:013 AAPL: #[EB|SB] 0x1
15:359 00:013 AAPL: #[EB.B.MN|BM:+SB]
15:373 00:013 AAPL: #[EB|LIMGP] Acpi(PNP0A03,0)/Pci(1B|0)/Pci(0|0)/?[ 0x83 0x17 0x10 0x0 0x1 0x0 0x0 0x0 0x0 0x25 0x38 0x5B 0x91 0xB1 0x4 0x3F ]/HD(Part2,Sig4261C6C2-CB67-4F47-8186-5B17B1A9D677)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842)
15:386 00:013 AAPL: #[EB|LIMG:FP] \D9150698-E57E-4C42-8A64-451B4B81053A\System\Library\CoreServices\boot.efi
15:401 00:014 AAPL: #[EB|LIMGPT]
15:415 00:013 AAPL: #[EB.OPT.LXF|F] <"\\D9150698-E57E-4C42-8A64-451B4B81053A\\System\\Library\\CoreServices\\com.apple.Boot.plist">
15:428 00:013 AAPL: #[EB.LD.LF|IN] 0 1 <"\\D9150698-E57E-4C42-8A64-451B4B81053A\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0">
15:441 00:012 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\D9150698-E57E-4C42-8A64-451B4B81053A\\System\\Library\\CoreServices\\com.apple.Boot.plist">
15:454 00:013 AAPL: #[EB.OPT.LXF|LF!] Err(0xE)
15:467 00:012 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist">
16:211 00:744 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0">
16:224 00:012 AAPL: #[EB|KF] <"">
16:238 00:013 AAPL: #[EB|MBA:CL] <"">
16:251 00:013 AAPL: #[EB|MBA:NV] <"-v keepsyms=1 debug=0x100 alcid=1 slide=72 ">
16:264 00:013 AAPL: #[EB|MBA:KF] <"">
16:277 00:012 AAPL: #[EB|MBAUT] <"-v keepsyms=1 debug=0x100 alcid=1 slide=72 chunklist-security-epoch=0 -chunklist-no-rev2-dev">
16:292 00:014 AAPL: #[EB|LOG:VERBOSE] 2021-01-20T10:34:11
16:305 00:013 AAPL: #[EB.CSR.S|VAR] 0x00000040
16:318 00:013 AAPL: #[EB|OPT:BM] 0x280182
16:331 00:012 AAPL: #[EB.OPT.LXF|F] <"\\D9150698-E57E-4C42-8A64-451B4B81053A\\System\\Library\\CoreServices\\PlatformSupport.plist">
16:344 00:013 AAPL: #[EB.LD.LF|IN] 0 1 <"\\D9150698-E57E-4C42-8A64-451B4B81053A\\System\\Library\\CoreServices\\PlatformSupport.plist"> <"0">
16:357 00:013 AAPL: #[EB|B:VAw]
16:371 00:014 AAPL: #[EB|P:CPR] N
16:384 00:012 AAPL: #[EB|P:MPI] N
16:397 00:013 AAPL: #[EB|P:BPI] N
16:410 00:013 AAPL: #[EB|KMR] 215334912
16:424 00:013 AAPL: #[EB.CS.CSKSD|+]
16:437 00:012 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF
16:451 00:014 AAPL: #[EB|WL] 0 0 0x01 0x01 6 0x0E
16:465 00:013 AAPL: #[EB.CS.LFC|+]
16:478 00:013 AAPL: #[EB.LD.LF|IN] 0 1 <"System\\Library\\Caches\\com.apple.corestorage\\EncryptedRoot.plist.wipekey"> <"0">
16:493 00:014 AAPL: #[EB.FS.AGSVH|PU] D9150698-E57E-4C42-8A64-451B4B81053A
16:506 00:013 AAPL: #[EB.FS.AGSVH|!] Err(0xE) <- BS.LocHB 59D76AE4-37E3-55A7-B460-EF13D46E6020
16:519 00:012 AAPL: #[EB.G.CS|-?] Ok(0)
16:540 00:021 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1">
16:554 00:014 AAPL: #[EB.B.SBS|SZ] 723512
16:574 00:020 AAPL: #[EB|B:SHA] <dffbec4c2621fe23a1e7179de04de783ab8b4279>
16:593 00:018 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82
16:609 00:016 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV
16:624 00:014 AAPL: #[EB|WLT] 0xaa8f8b9d
16:645 00:020 AAPL: #[EB.LD.LKC|D] <"boot\System\Library\KernelCollections\BootKernelExtensions.kc.development">
16:665 00:020 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> <"0">
16:685 00:020 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.development">
16:704 00:018 AAPL: #[EB.LD.LKC|R.2] <"boot\System\Library\KernelCollections\BootKernelExtensions.kc">
16:723 00:019 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc"> <"0">
17:947 01:224 AAPL: #[EB|SB] 0x1
18:486 00:539 AAPL: #[EB|SB:SBGMFNS] j137ap.im4m
19:350 00:863 AAPL: #[EB|SB:MF] boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.j137ap.im4m
19:370 00:019 AAPL: #[EB.LD.LF|IN] 0 1 <"boot\\System\\Library\\KernelCollections\\BootKernelExtensions.kc.j137ap.im4m"> <"0">
19:711 00:341 AAPL: #[EB|SB:MKRN]
19:735 00:023 AAPL: #[EB.LD.LKFS|-?] Ok(0)
19:749 00:014 AAPL: #[EB.LD.LKC|-?] Ok(0)
19:766 00:017 AAPL: #[EB|FWFM] 0x00000000FFDFFF7F
19:782 00:015 AAPL: #[EB|FWFT] 0x00000000FD8FF576
19:796 00:013 AAPL: #[EB|BST:REV1]
19:810 00:014 AAPL: #[EB|CSRUT] 0x00000040
19:823 00:013 AAPL: #[EB.BST.FBS|+]
19:837 00:013 AAPL: #[EB.BST.FBS|ADSZ] 0
19:852 00:014 AAPL: #[EB.BST.FBS|KSSZ] 0
19:867 00:014 AAPL: #[EB|SB:SBGMFNS] j137ap.im4m
19:883 00:016 AAPL: #[EB|RHF] usr\standalone\OS.dmg.root_hash
19:900 00:017 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.j137ap.im4m">
19:918 00:017 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0">
19:936 00:018 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash.j137ap.im4m"> <"0">
19:953 00:016 AAPL: #[EB.BST.FBS|RHPSZ] 229
19:968 00:015 AAPL: #[EB.BST.FBS|RHMSZ] 3626
19:984 00:015 AAPL: #[EB.B.WFDW|!WF] Err(0xE) 0
19:999 00:015 AAPL: #[EB|LOGT] 2021-01-20T10:34:15
20:016 00:016 AAPL: #[EB|LOG:EXITBS:START] 2021-01-20T10:34:15

 

[Edhawk]

Are you using the Bluetooth from the Intel card that was installed in your motherboard's CNVI port/connector or the Bluetooth from the Fenvi card?

Do you have both connected?

I ask because you have Intel WiFi and Bluetooth kexts in your /OC/Kexts folder, but stated you were using the Fenvi-T919 WiFi/BT card.

Just for reference anyone I have helped previously who was using the Z390 Designare motherboard had to remove/disable the Intel WiFi/BT card and also to disable the CNVi port/connector, with a custom SSDT.

Have you read Casey SJ's guide for the Z390 Designare board/system - https://www.tonymacx86.com/threads/...390-thunderbolt-3-i7-9700k-amd-rx-580.267551/

 

[Adiscz]

Are you using the Bluetooth from the Intel card that was installed in your motherboard's CNVI port/connector or the Bluetooth from the Fenvi card?

Do you have both connected?

I ask because you have Intel WiFi and Bluetooth kexts in your /OC/Kexts folder, but stated you were using the Fenvi-T919 WiFi/BT card.

Just for reference anyone I have helped previously who was using the Z390 Designare motherboard had to remove/disable the Intel WiFi/BT card and also to disable the CNVi port/connector, with a custom SSDT.

Have you read Casey SJ's guide for the Z390 Designare board/system - https://www.tonymacx86.com/threads/...390-thunderbolt-3-i7-9700k-amd-rx-580.267551/

Hi, and thanks for the info! Yes I have installed Fenvi and I forgot to disable intel. So I need to use SSDT which are attached in Casey's post?

 

[Edhawk]

Depends on what you are currently using, you may not need all of the SSDT's Casey provided. Some like the SSDT-UIAC.... can be replaced with a USBPorts.kext, which he also provided. Some may be for devices you don't use, such as Thunderbolt, Nvidia GPU (second dGPU for Windows).

You probably need a copy of SSDT-DESIGNARE-Z390-NO-CNVW.aml, to disable the Intel WiFi/BT card.
You probably need a copy of SSDT-DTPG.aml
You probably need a copy of SSDT-Z390-DESIGNARE-RX580-V2.aml

You could try using these three SSDT's that work with or disable some of the built-in and add-on components for the Z390 Designare motherboard and your setup.

If you don't already have a your USB ports configured, then using the USBPorts.kext he provided should help. Just be aware that when using a USBPorts.kext you shouldn't use the USBInjectAll.kext or the USB port limit patches. Using the Change XHCI to XHC rename patch in your config.plist is still necessary.

You may need to edit the USBPorts.kext to better suit how your case ports are connected to the motherboard. There are two images on the post, which he attached as a PDF that I have also attached below. It shows which ports are connected to which internal headers etc. use this PDF to gauge how it matches with your setup. You will probably find moving a USB header plug to another header port will be easier than editing the kext.

If you want me to have a look at your Clover or OC setup post a copy here, just remember to redact the Serial Number, Board Serial Number, SMUUID/UUID, MLB and ROM codes.

 

[Adiscz]

Depends on what you are currently using, you may not need all of the SSDT's Casey provided. Some like the SSDT-UIAC.... can be replaced with a USBPorts.kext, which he also provided. Some may be for devices you don't use, such as Thunderbolt, Nvidia GPU (second dGPU for Windows).

You probably need a copy of SSDT-DESIGNARE-Z390-NO-CNVW.aml, to disable the Intel WiFi/BT card.
You probably need a copy of SSDT-DTPG.aml
You probably need a copy of SSDT-Z390-DESIGNARE-RX580-V2.aml

You could try using these three SSDT's that work with or disable some of the built-in and add-on components for the Z390 Designare motherboard and your setup.

If you don't already have a your USB ports configured, then using the USBPorts.kext he provided should help. Just be aware that when using a USBPorts.kext you shouldn't use the USBInjectAll.kext or the USB port limit patches. Using the Change XHCI to XHC rename patch in your config.plist is still necessary.

You may need to edit the USBPorts.kext to better suit how your case ports are connected to the motherboard. There are two images on the post, which he attached as a PDF that I have also attached below. It shows which ports are connected to which internal headers etc. use this PDF to gauge how it matches with your setup. You will probably find moving a USB header plug to another header port will be easier than editing the kext.

If you want me to have a look at your Clover or OC setup post a copy here, just remember to redact the Serial Number, Board Serial Number, SMUUID/UUID, MLB and ROM codes.

Thank you.

There was some other issues with that migration so I Installed it from scratch and everything is working now.