Audio - HDMI Audio AppleHDA [Guide]

[toleda]

Hm, after wake up black screen...

That would be a graphics problem. Off topic.

 

[djmastera2000]

Sure...sorry

 

[Jimster1]

I am trying to install audio to go through my Gigabyte GA-Z87X-UD5H onboard sound. Which guide do I follow? Confused...

 

[Jimster1]

Can you advise me, i'm reading dyslexic, and perhaps a bit thick!

What ones do I download for the GAZ87X-UD5H?

 

[toleda]

What ones do I download for the GAZ87X-UD5H?

Post #1/Requirements/3. Intel Motherboard series

 

[xelanaiznac]

hi toleda. can you please have a look at this issue?

1 i can’t see hdmi peripheral, maybe cause to plx bridge
2 OS X 10.11/maximus Vi extreme/BIOS 1603/4790k/nvidia 980ti
3 dsdt edit, clean compile +hdmi nvidia a1 patch

files are attached.

one or two months ago i had same issue with a z97 gigabyte motherboard, and you gave me the required dsdt edits, and they worked.
i can’t apply those edits on this dsdt, otherwise i can’t compile it because maciasl gives me error

 

[toleda]

have a look at this issue?

Interesting, the ssdt is install in the x16 slot and the graphics card is installed in a x8 slot. Why?

 

[xelanaiznac]

maximus VI extreme has a strange pci express configuration.
i have 1 gpu and 2 pci express ssd. (one is not mounted yet, as you have seen)
if i put the gpu into slot 1, it works at 8x because it shares bandwidth with the ssd pci express in slot 3.
if i put gpu into slot 2, i can add ssd into slot 1 and into slot 3 while gpu works at 16x

other question:
in windows i can connect monitor with display port to my nvidia vga and meanwhile i can connect intel gpu to my hdmi decoder.
is it possible to have the same configuration in mac os? if i connect the display port of my nvidia vga and meanwhile hdmi cable(or display port) to my igpu i have kernel panic and system reboots.

 

[toleda]

i have 1 gpu and 2 pci express ssd.
is it possible to have the same configuration in mac os? i

Slot 1 does not have the pci bridge, normal dsdt edits work
All other slots have pci bridge, custom edits required.
ssd should work in the x4 slot
Cannot hot plug HD4600/HDMI in OS X, boots fine with HD4600/HDMI
See Integrated and Discrete Graphics, Working Together

 

[xelanaiznac]

Slot 1 does not have the pci bridge, normal dsdt edits work
All other slots have pci bridge, custom edits required.
ssd should work in the x4 slot
Cannot hot plug HD4600/HDMI in OS X, boots fine with HD4600/HDMI
See Integrated and Discrete Graphics, Working Together

sorry toleda, i'm not so expert.
assuming that i put ssd into slot 1, gpu in slot 2 (to have it at 16x), ssd in slot 4 (as manual suggests)and wi-fi /bt pci card in slot 4x, which are the dsdt edits that i have to do?
i attached my new files