Audio broken on GA-Z68MA-D2H-B3 after OS X reinstall

[tog]

Hi,

My setup = GA-Z68MA-D2H-B3 ; OS X 10.7.5; speakers plugged into green 3.5mm port on motherboard; had audio working on an earlier OS X install but lost it after a clean reinstall (using Multibeast and the GA-Z68X-UD3H-B3 F12 DSDT from the tonymacx86 DSDT database.

My symptoms = 'Sound' preferences pane says 'No output devices found'; 'Audio' screen in 'System Information' just says "Intel High Definition Audio: Audio ID: 892" and then lists the output like 'Line output' and 'Headphone'

To fix this I've tried using the steps in post 1 of http://www.tonymacx86.com/audio/23703-got-audio-work-889-gigabyte-ga-z68x-ud3h-b3.html - see my posts at http://www.tonymacx86.com/audio/23703-got-audio-work-889-gigabyte-ga-z68x-ud3h-b3-25.html

Any pointers/help/ways I could diagnose the problem would be much appreciated

Thanks in advance,
Tom

 

[toleda]

Hi,

My setup = GA-Z68MA-D2H-B3 ; OS X 10.7.5; speakers plugged into green 3.5mm port on motherboard; had audio working on an earlier OS X install but lost it after a clean reinstall (using Multibeast and the GA-Z68X-UD3H-B3 F12 DSDT from the tonymacx86 DSDT database.

Appears you have audio enabler(s) installed in error. Delete:
1. S/L/E/HDAEnabler892.kext and any other HDAEnabler???.kext
2. S/L/E/ALC8xxHDA.kext and any other ALC???.kext

Run MultiBeast:
1. MultiBeast 4.6.1/Drivers & Bootloaders/Kexts & Enablers/Audio/Realtek ALC8xx/Patched AppleHDA/ALC889
2. MultiBeast 4.6.1/System Utilities

Reply with a copy of IOReg. [Guide] How to Make a Copy of IOReg.

 

[tog]

Thanks, that worked! Here's my IOReg.

 

[toleda]

Thanks, that worked! Here's my IOReg.

IOReg is corrupt. Use v2.1 from the link.

 

[tog]

Here you go. (I appreciate your spending your time on this.)