CaseySJ
Moderator
- Joined
- Nov 11, 2018
- Messages
- 22,236
- Motherboard
- Asus ProArt Z690-Creator
- CPU
- i7-12700K
- Graphics
- RX 6800 XT
- Mac
- Classic Mac
- Mobile Phone
New BIOS released. Version 1003.
Notes:
01. Improve system performance and Window 11 OS stability.
02. Update USB PD FW to 1.0F.
03. Update Intel ME FW to 16.0.15.1620 V3
04. Add Thunderbolt FW update method for onboard Thunderbolt models and ThunderboltEX 4 Card support models
05. Update Intel microcode.
06. Improve DRAM compatibility
07. Change PCIe speed hotkey item from F9 to F6.
I haven’t updated yet. I wonder what the new usb pd firmware does. Unclear whether this bios comes with a thunderbolt firmware update or if it enables the functionality for the nvm to be updated at some later point in the future.
** WARNING: Do not install BIOS 1003 **
Update: BIOS 1003 reboot cycle was solved by performing CMOS reset,
after which the update succeeded. Refer to 2nd post below.
Update: BIOS 1003 reboot cycle was solved by performing CMOS reset,
after which the update succeeded. Refer to 2nd post below.
After installing BIOS 1003, the Asus Z690 ProArt Creator is going into a boot loop as follows:
- Power on
- POST succeeds
- Asus splash screen appears for 1-3 seconds
- System reboots
Last edited: