- Joined
- Feb 24, 2013
- Messages
- 2,651
- Motherboard
- N/A
- CPU
- N/A
- Graphics
- N/A
- Mac
- Mobile Phone
To be clear, I attempted to boot 10.14.6 with the RTC0 file and it did not boot at all, with BIOS 2002. I am not clear on which file I need for the bios upgrade. I will upgrade the BIOS now to 3203 and see if it boots with only the RTC0 file. I look forward to your EFI! Thanks
1. Flash to 3203 that I provided with the Apple logo (or get it from ASUS website without the logo)
2. Clear CMOS (CLR_CMOS on mobo)
3. Set up your BIOS settings again and make sure Above 4G is enabled.
4. Throw my EFI onto a USB flash disk
5. Edit the config.plist and add your current serial and UUID that you generated into PlatformInfo
6. Boot into the flash disk (F8 at BIOS menu)
Please give me about 30 mins and I will upload the latest EFI from my system. Also it's best to have a second computer (like a laptop) for troubleshooting, or at least Windows so you can boot into it and modify your EFI partition if your main system goes down.
EDIT: @r2tincan look at this post for the EFI. It should work with Mojave (Haven't personally tested). If it doesn't work try the AWAC method instead of RTC0 which is what I'm using.
Last edited: