Asus VivoPC (VM62) can't sleep!

[pastrychef]

@pastrychef, here's the output for failure

iMacdeStagiaire:~ stagiaire1$ pmset -g log | grep -i failure
2019-04-01 23:56:25 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 02:06:38 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 02:41:15 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 02:48:37 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 03:19:20 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 03:44:25 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-02 19:33:42 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:
2019-04-03 01:52:32 +0200 Failure                 Platform Driver Failure during wake due to 0x04000021:

I don't know which device the failure is related to. Usually, each of those lines are followed by the name of the device causing the problem...

 

[pit512]

Hmmm, I suspected there was not much interesting clues in this output... Too bad.

Did you take a look at the 2 others?

 

[pastrychef]

Hmmm, I suspected there was not much interesting clues in this output... Too bad.

Did you take a look at the 2 others?

The only thing that I would look in to is the Connexant audio stuff. But it didn't seem to cause failure.

Try to find out what driver causing the failures are.

 

[pit512]

The only thing that I would look in to is the Connexant audio stuff. But it didn't seem to cause failure.

How do you know this mini PC uses Conexant audio?

Try to find out what driver causing the failures are.

How could I find out that? Through the Console app?
I used to use it before, back in the days of Mountain Lion (if i recall correctly), but now I find it very confusing...

 

[pastrychef]

How do you know this mini PC uses Conexant audio?


How could I find out that? Through the Console app?
I used to use it before, back in the days of Mountain Lion (if i recall correctly), but now I find it very confusing...

The Conexant is in your logs.

That's the issue... Trying to figure out which device it is. The console won't be much help, it will just show the same thing. Try to make sure everything is named correctly, i.e. HDEF, IGPU, etc.

 

[pit512]

OK, thanks for your help, I'll try to investigate and report back...