Asus P6T + GTX 260 + Mountain Lion = Can't wake from sleep

[ayacode]

Unfortunately, still no luck...

I installed the CUDA drivers successfully.
I cut down org.chameleon.Boot.plist to look like tot's.
I repatched a fresh AppleRTC.kext
I'm using tot's dsdt.aml (I had to use a patched AppleACPIPlatform.kext to prevent the 2 min wait time during boot with this dsdt)
I verified I don't have NullCPUPower...kext

I put all my kexts in S/L/E and enabled kernelcache. That fortunately worked =).

Same exact behavior for sleep. I'ld give up and say that my hardware isn't working right, but I'm able to sleep/wake properly in SL.

Also, I tried to remote login to the machine again after wake just to make sure its not only lack of video. I can't login, so it not just a black screen, its just hosed after wake attempt. Can't seem to find anything in the system log during the wake attempts either.

Maybe its BIOS settings? but again, I haven't touched my bios settings since SL.

My boot up log looks fairly clean, too. Take a look yourself... (I masked out some stuff and replaced it with ### on purpose).

Aug  7 17:41:53 localhost bootlog[0]: BOOT_TIME 1344375713 0
Aug  7 17:41:58 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Aug  7 17:41:58 localhost kernel[0]: vm_page_bootstrap: 1520577 free pages and 44095 wired pages
Aug  7 17:41:58 localhost kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
Aug  7 17:41:58 localhost kernel[0]: zone leak detection enabled
Aug  7 17:41:58 localhost kernel[0]: standard timeslicing quantum is 10000 us
Aug  7 17:41:58 localhost kernel[0]: standard background quantum is 2500 us
Aug  7 17:41:58 localhost kernel[0]: mig_table_max_displ = 74
Aug  7 17:41:58 localhost kernel[0]: corecrypto kext started!
Aug  7 17:41:58 localhost kernel[0]: Running kernel space in FIPS MODE
Aug  7 17:41:58 localhost kernel[0]: Plist hmac value is    ###
Aug  7 17:41:58 localhost kernel[0]: Computed hmac value is ###
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Aug  7 17:41:58 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=9 LocalApicId=136 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=10 LocalApicId=137 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=11 LocalApicId=138 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=12 LocalApicId=139 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=13 LocalApicId=140 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=14 LocalApicId=141 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=15 LocalApicId=142 Disabled
Aug  7 17:41:58 localhost kernel[0]: AppleACPICPU: ProcessorId=16 LocalApicId=143 Disabled
Aug  7 17:41:58 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Aug  7 17:41:58 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Aug  7 17:41:58 localhost kernel[0]: calling mpo_policy_init for Sandbox
Aug  7 17:41:58 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Aug  7 17:41:58 localhost kernel[0]: calling mpo_policy_init for Quarantine
Aug  7 17:41:58 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Aug  7 17:41:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Aug  7 17:41:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Aug  7 17:41:58 localhost kernel[0]: MAC Framework successfully initialized
Aug  7 17:41:58 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Aug  7 17:41:58 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Aug  7 17:41:58 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 88:111
Aug  7 17:41:58 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Aug  7 17:41:58 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
Aug  7 17:41:58 localhost kernel[0]: [ PCI configuration begin ]
Aug  7 17:41:58 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)
Aug  7 17:41:58 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1112
Aug  7 17:41:58 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
Aug  7 17:41:58 localhost kernel[0]: PCI configuration changed (bridge=4 device=2 cardbus=0)
Aug  7 17:41:58 localhost kernel[0]: [ PCI configuration end, bridges 8 devices 24 ]
Aug  7 17:41:58 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Aug  7 17:41:58 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Aug  7 17:41:58 localhost kernel[0]: rooting via boot-uuid from /chosen: ###
Aug  7 17:41:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Aug  7 17:41:58 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Aug  7 17:41:58 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Aug  7 17:41:58 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Aug  7 17:41:58 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Aug  7 17:41:58 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Aug  7 17:41:58 localhost kernel[0]: FireWire runtime power conservation disabled. (2)
Aug  7 17:41:58 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD3000GLFS-01F8U0 Media/IOGUIDPartitionScheme/Mountain Lion@2
Aug  7 17:41:58 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Aug  7 17:41:58 localhost kernel[0]: Kernel is LP64
Aug  7 17:41:58 localhost kernel[0]: FireWire (OHCI) VendorID 1106 ID 3044 built-in now active, GUID ###; max speed s400.
Aug  7 17:41:58 localhost kernel[0]: USBMSC Identifier (non-unique): 071031201791 0x424 0x2228 0x539
Aug  7 17:42:01 localhost kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8056 Singleport Copper SA
Aug  7 17:42:18 --- last message repeated 1 time ---
Aug  7 17:42:01 localhost kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
Aug  7 17:42:18 --- last message repeated 1 time ---
Aug  7 17:42:01 localhost kernel[0]: yukon: Ethernet address 00:23:54:48:41:35
Aug  7 17:42:01 localhost kernel[0]: yukon: Ethernet address 00:23:54:48:41:34
Aug  7 17:42:04 localhost kernel[0]: macx_swapon SUCCESS
Aug  7 17:42:14 localhost kernel[0]: Waiting for DSMOS...
Aug  7 17:42:14 Kuroi kernel[0]: [IOBluetoothHCIController][start] -- completed
Aug  7 17:42:14 Kuroi kernel[0]: Previous Shutdown Cause: 3
Aug  7 17:42:14 Kuroi kernel[0]: DSMOS has arrived
Aug  7 17:42:15 Kuroi kernel[0]: No interval found for . Using 8000000
Aug  7 17:42:19 --- last message repeated 5 times ---
Aug  7 17:42:15 Kuroi kernel[0]: AppleTyMCEDriver::start coreVIDPID = 0xffffffff Number of packages = 1 Number of cpus = 8 memory monitor trough MCA
Aug  7 17:42:15 Kuroi kernel[0]: NVDANV50HAL loaded and registered.
Aug  7 17:42:15 Kuroi kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice05e2
Aug  7 17:42:16 Kuroi kernel[0]: NTFS driver 3.10 [Flags: R/W].
Aug  7 17:42:16 Kuroi kernel[0]: NTFS volume name , version 3.1.
Aug  7 17:42:17 Kuroi kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af08,0c01,0200,cde1,3800]

 

[ayacode]

I tried switching out the GTX 260 card for an older ATI 3870 just to test if it is the video card. Still the same behavior, this is really getting to me,

Any more ideas? Any ideas of things I should check?

 

[ayacode]

I disconnected my second monitor and thought I would try with just 1 monitor. Also, this is how my system.log looks like when I try to put it to sleep.

Aug  9 18:34:01 Kuroi.local WindowServer[101]: Created shield window 0xbd for display 0x2b284bd1
Aug  9 18:34:01 Kuroi.local WindowServer[101]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
Aug  9 18:34:01 Kuroi.local WindowServer[101]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)

Nothing in the log for when it tries to come back from sleep.


Can someone do me a favor and post what their system.log looks going to sleep and waking back up?

Thanks

 

[gameace99]

I'd help you out, but I can't get it either. I just went even further back, tried to do a fresh install again and can't even fully install the OS. 80% of the way through the install process the system just dies

 

[Asus-Freak]

Look in the console for "Why"

Examples:

Why ?
Why USB

 

[a1k0n]

Same here.
Asus P5QD Turbo with GTX 260 XFX @ 10.8.1
PC go to sleep an all stand still but cant wake up.
Fans rotation but No Screen.

 

[ayacode]

It's sad but I think I've given up on getting sleep to work on this machine. =(

The baffling thing is that many people got it to work with my exact same hardware. and it works with my exact same hardware for 10.6.8.

I've posted this on other forums without any luck of getting an answer.

No suggestions made here helped. I do appreciate the effort though guys.

 

[ayacode]

Thanks for the tip.

I tried installing both the framework and the latest kext from the 10.8.2 directory in the link you posted as per aolive's instructions.

Still no luck, same symptoms.

 

[VaggD]

Hi, I have the same set up as you and i'm trying to install mavericks(using this guide:http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html)
but i can't find the 'HPET" setting on bios please help.
Edit: do i have to change the DSDT?