ASRock H77M-ITX Owners Page

[xadmin]

So does sleep/wake work with this motherboard?

 

[cseistrup]

So does sleep/wake work with this motherboard?

I can put it to sleep, but I can't get it to wake up properly. Fans turn on, but the screen stays black. I would like to get it working, but I don't care too much since it boots in 10 seconds.

 

[carmico]

but I don't care too much since it boots in 10 seconds.

this!

not a problem SleepMode. Switch it off, and then On. REAL ENERY SAVIN'

 

[carmico]

i'm runnin ML 10.8.1

everything seems to be ok.

the only thing... in verbose boot there's a WARNING/ERROR (red lined): it's a problem???



and with VGA (RGB) doesn't boot , stuck at this point (same screenshot).

with DVI all is ok, i have to try with HDMI yet.

 

[cseistrup]

i'm runnin ML 10.8.1

everything seems to be ok.

the only thing... in verbose boot there's a WARNING/ERROR (red lined): it's a problem???

View attachment 31660

and with VGA (RGB) doesn't boot , stuck at this point (same screenshot).

with DVI all is ok, i have to try with HDMI yet.

Which CPU are you using? If the system is running fine, its not a huge issue, but speedstepping probably isn't working. Did you install the hardware monitor when running multi beast?

As far as the type of video cable you are using, I think that is common. Real Macs only use digital interfaces and I have heard of other people having the same issues. If its possible to use the digital cables (hdmi and DVI), I would stick to those due to their better image quality.

 

[carmico]

Which CPU are you using? If the system is running fine, its not a huge issue, but speedstepping probably isn't working. Did you install the hardware monitor when running multi beast?

As far as the type of video cable you are using, I think that is common. Real Macs only use digital interfaces and I have heard of other people having the same issues. If its possible to use the digital cables (hdmi and DVI), I would stick to those due to their better image quality.

CPU is i7 3770 without "K"

Speedstep is working fine i guess because when i'm surfin' the net CPU is at 1600mhz, when i launch some heavy apps processor goes to +3500mhz.

CPU Cooler is CoolerMaster GaminII M4 , absolutely quiet, 600rpm with cpu at 34 degrees. 41-43 under stress.

i'm using same Cborgs Multibeast settings. HWmonitor installed.

for the VGA not a problem because i gonna use the HDMI output on LG M2382D.

the only thing, that warning/error on the boot.

for disable the Verboose Boot do i have to reinstall Multibeast Settings? or there's another way?

within these days i'm goin' to my post my build ;-)

thanks! regards from italy
Carlo

 

[cseistrup]

CPU is i7 3770 without "K"

Speedstep is working fine i guess because when i'm surfin' the net CPU is at 1600mhz, when i launch some heavy apps processor goes to +3500mhz.

CPU Cooler is CoolerMaster GaminII M4 , absolutely quiet, 600rpm with cpu at 34 degrees. 41-43 under stress.

i'm using same Cborgs Multibeast settings. HWmonitor installed.

for the VGA not a problem because i gonna use the HDMI output on LG M2382D.

the only thing, that warning/error on the boot.

for disable the Verboose Boot do i have to reinstall Multibeast Settings? or there's another way?

within these days i'm goin' to my post my build ;-)

thanks! regards from italy
Carlo

Finder->Go->Go to Folder Type /Extra

what does you org.chameleon.boot.plist say?

 

[carmico]

Finder->Go->Go to Folder Type /Extra

what does you org.chameleon.boot.plist say?

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0 npci=0x3000 -v</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>



now, i need to get HDMI Audio working...

another problem is that with HDMI Output... when i power on Mac... i have to switch Input on the Monitor and then get back to HDMI so display is correct, if i don't that, screen is inverted cutted at mid.

 

[cseistrup]

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0 npci=0x3000 -v</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>



now, i need to get HDMI Audio working...

another problem is that with HDMI Output... when i power on Mac... i have to switch Input on the Monitor and then get back to HDMI so display is correct, if i don't that, screen is inverted cutted at mid.

To get rid of verbose mode, delete the -v from

<key>Kernel Flags</key>
<string>darkwake=0 npci=0x3000 -v</string>

If you are only booting Mac not windows too, you can switch

<key>Timeout</key>
<string>2</string>

to

<key>Quiet Boot</key>
<string>Yes</string>

That will shave another 3 seconds off your boot time. Good luck with the HDMI audio. I will never use it, but I am sure you can find some help with that.

 

[carmico]

To get rid of verbose mode, delete the -v from

<key>Kernel Flags</key>
<string>darkwake=0 npci=0x3000 -v</string>

If you are only booting Mac not windows too, you can switch

<key>Timeout</key>
<string>2</string>

to

<key>Quiet Boot</key>
<string>Yes</string>

That will shave another 3 seconds off your boot time. Good luck with the HDMI audio. I will never use it, but I am sure you can find some help with that.

thanks for the tips m8 !