Hi Toleda, I'm having a lot of difficulty getting the HDMI output working. My hackintosh is a GA-Z77-DS3H board with i7-3770 and NVidia 1030 running macOS Sierra 10.12.6 ... For generic audio, I was using the simple AppleALC.kext and Lilu.kext in CLOVER/kexts/Other and injecting it in config.plist, and it seems to work fine with the ALC887 chip on board. For HDMI, I run your script audio_cloverHDMI-130_v0.7.command, which installed in /CLOVER/ACPI/patched the SSDT-HDMI-NVIDIA-PEG0.aml, and rebooted the machine. I see that now in the Audio section under "Intel High Definition Audio" the HDMI/DisplayPort output appears, but not under "Devices" ... also, the Sound Properties does not show the HDMI output either... I looked into your documentation - with IOREG search for HDEF and there are no "Credits" ... under GFX0 I find hda-gfx with value "onboard-2" ... under display0 I find the right connector-type <00 08 00 00> and under HDAU also get hda-gfx with value "onboard-2" ... seems that at the lowest levels it finds the HDMI output, but then when it is supposed to create a "device" it is failing. Any suggestions? Sending you all the information you requested in the attached file.
Thanks!