- Joined
- Dec 14, 2013
- Messages
- 83
- Motherboard
- Asus ROG Strix Z390-E
- CPU
- i7-8700K
- Graphics
- Vega 64 LE
- Mac
- Mobile Phone
I followed the instructions and my Sapphire RX 480 8GB (reference) works. All I did was:
Issues: Main monitor is connected via DP and works great. Second monitor is connected by HDMI and won't work at all. If I uncheck Inject ATI and Inject Intel, it works, but the resolution is off and very pixelated/laggy on the second monitor. Main monitor seems to work just fine under those settings, however About This Mac shows R9 xxx instead of RX 480.
Also, FCPX 10.3 crashes as soon as it opens. This was happening with my R9 280x, but it was a failing card which is why I just replaced it (I was having other issues with that card). If I remove the GPU and just use Intel integrated graphics, FCPX works just fine.
Any insight on any of this?
- Clover v3949
- Add 0x67DF1002 to /System/Library/Extensions/AMDRadeonX4100.kext/Contents/Info.plist (remember to fix permission and clear cache after saving, I use Kext Utility)
- config.plist: Inject ATI = true, and yes, that's it, that's the only config you need to change, no FBName or FakeID
- View attachment 222822
Issues: Main monitor is connected via DP and works great. Second monitor is connected by HDMI and won't work at all. If I uncheck Inject ATI and Inject Intel, it works, but the resolution is off and very pixelated/laggy on the second monitor. Main monitor seems to work just fine under those settings, however About This Mac shows R9 xxx instead of RX 480.
Also, FCPX 10.3 crashes as soon as it opens. This was happening with my R9 280x, but it was a failing card which is why I just replaced it (I was having other issues with that card). If I remove the GPU and just use Intel integrated graphics, FCPX works just fine.
Any insight on any of this?