- Joined
- Jan 22, 2013
- Messages
- 40
- Motherboard
- Gigabyte Z390i aorus pro wifi
- CPU
- i9-9900K
- Graphics
- 6800XT
- Mobile Phone
hi !
I follow the guide to create SSDT for my ASUS ROG STRIX Z390-f mb
i have BCM94360CS2 on PCI1x card for wifi and BT, plug with USB. It works OOB but I have a problem when sleep:
the OS can sleep, but my computer hardware sleep and wake every minute.. when I disconnect the USB from the bluetooth card, it's fine.
here a video of the problem, as you can see my screen turn off correctly, OS is sleep, but my hardware wake and sleep (every minute):
i have create the SSDT with USB Connector for the internal USB 255, but it's not working, the problem still here..
I have SSDT-USB.aml in CLOVER/ACPI/patched and UsbInjectAll.kext in CLOVER/kexts/other
All my USB ports works (2.0 and 3.0), I have mapping only 14 ports to not use the PLRP.
As you can see, HS06 is the internal port, with UsbConnector 0xff :
HS06 and HS11 is my internal 2.0 USB
I can't change the internal USB port because when I switch the cable HS06<->HS11 (BT card and NZXT cooling cable), my system doesn't see my BT card but see the cooling cable, I don't know why.
Can you help me ?
Attached my SSDT.dsl, seems to be good, can you check it ?
Thank you
I follow the guide to create SSDT for my ASUS ROG STRIX Z390-f mb
i have BCM94360CS2 on PCI1x card for wifi and BT, plug with USB. It works OOB but I have a problem when sleep:
the OS can sleep, but my computer hardware sleep and wake every minute.. when I disconnect the USB from the bluetooth card, it's fine.
here a video of the problem, as you can see my screen turn off correctly, OS is sleep, but my hardware wake and sleep (every minute):
i have create the SSDT with USB Connector for the internal USB 255, but it's not working, the problem still here..
I have SSDT-USB.aml in CLOVER/ACPI/patched and UsbInjectAll.kext in CLOVER/kexts/other
All my USB ports works (2.0 and 3.0), I have mapping only 14 ports to not use the PLRP.
As you can see, HS06 is the internal port, with UsbConnector 0xff :
HS06 and HS11 is my internal 2.0 USB
I can't change the internal USB port because when I switch the cable HS06<->HS11 (BT card and NZXT cooling cable), my system doesn't see my BT card but see the cooling cable, I don't know why.
Can you help me ?
Attached my SSDT.dsl, seems to be good, can you check it ?
Thank you
Attachments
Last edited: