Hello again.
I managed to get it up and running with a little settings help from this post:
http://www.tonymacx86.com/user-buil...z87n-wifi-i5-4670k-760gtx-customac-build.html
I figured i mention it for everyone who has come across similar problems when only using onboard graphics.
I made my own smaller 3D-Model of the Base and printed it at shapeways. (since i dont have the external graphics card i didnt need all the existing space. I also tried to get it as close as possible to match the original design. (for instance the right number of air ventholes). Additionally i will print my own Input Output plate which i will glue to extension cables and usb hubs which fit perfectly into my case. (also thx to the free space without an extra gfx)
If anyone is interested in my 3d-model feel free to let me know.
Further differences to Johns build are:
(as mentioned)
- new Build-Layout with the board positioned vertically (Ports facing upwards, RAM facing downwards.)
- PVC Pipes instead of epoxy/metalrod system
- bequiet 400w psu
- be quiet 140mm casefan (rounded the edges off by hand)
- Corsair 2x 8gb 1600mhz
extension cables:
- 2x hdmi (wanted to add a second hdmi port to my custom i/o shield for dual displays) / 50 cm
- 2x 3.5mm Audio Jack (for mic and headphones) / 50cm
- 2x 1 to 4 usb 2.0 hub
- 2x Gigabit LAN Cuppling /5cm
- 2x LAN Cable /15cm
- Power Switch (with leds)
- 90° angled Power Cable (40cm)
missing:
- 4x USB 3.0 Extension Cables (25cm) / Did anybody try to use the internal USB 3.0 Pins?
- Mini Pcie Wifi-Bluetooth Substitute Card
- printed I/O Shield (Need to adjust the 3d file for the right cables)
Whats not working so far:
- Grizzled Screen at bootup which looks pretty annoying (doesnt interfere with booting)
- HDMI Audio // Feel free to tell me how to enable it
- Wifi (because of the card)
I will soon add some pictures,
Best Regards,
Niksda.