Contribute
Register

10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

Status
Not open for further replies.
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

juanjomz said:
GIGABYTE GTX 460 768MB run ok OOB in 10.7.5
Cinebench = 39.09

10.8.2 ???

:)
Click to expand...
Why are you wasting your time with Cinebench?

As documented like a 100 times on this site, it doesn't use the GPU on NVIDIA 4xx, 5xx or 6xx cards. The performance number you are seeing are for a CPU render.
 
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

mrengles said:
What about a patch for 670 & 680 cards with more then 2GB of VRAM? Please say yes, it would make life some much easier. :wave:
Click to expand...

On Multibeast 5.0.2

It's the same patch, for GTX670 4Go i select

Drivers > Graphics > NVidia Fermi OpenCL Patch and Nvidia GTX670 / 680 / 690 Support

And Graphics Enabler = No

When i click about macintosh my card recognize 4Go memory card. It's correct no ?
 
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

gunt said:
On Multibeast 5.0.2

It's the same patch, for GTX670 4Go i select

Drivers > Graphics > NVidia Fermi OpenCL Patch and Nvidia GTX670 / 680 / 690 Support

And Graphics Enabler = No

When i click about macintosh my card recognize 4Go memory card. It's correct no ?
Click to expand...

No; your card will work however, without the proper HEX edit openCL will not work. Heres some lite reading for yeah. =)

http://www.tonymacx86.com/multibeas...idia-gtx-670-680-690-patch-2gb-video-ram.html

-Mrengles
 
Clover UEFI Bootloader
Fatal1ty Z77 ProM |  i7 3770K |  GeForce GTX 670
Clover UEFI Bootloader
GA-Z77N-WIFI |  i5 3570K |  GeForce GTX 660 Ti
Clover UEFI Bootloader
P8Z77-M PRO |  i7 2700K |  Radeon HD 6870
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

Obvious Answer Man said:
Why are you wasting your time with Cinebench?

As documented like a 100 times on this site, it doesn't use the GPU on NVIDIA 4xx, 5xx or 6xx cards. The performance number you are seeing are for a CPU render.
Click to expand...

Thanks!

Unigive Heaven scores 52fps
 
imaK
GA-Z68AP-D3 |  i5 2500K |  GeForce GTX 660
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

The Greater than 2GB Patch in MultiBeast 5.0 is broken. It will be fixed in MultiBeast 5.1.
 
OctoTUF
TUF Z390-PRO GAMING |  i9 9900K |  Vega 64 8GB
KabyLake
GA-Z270X-Ultra Gaming |  i7 7700K |  HD 630
Kaby-Test
ROG STRIX Z270I GAMING |  i7 7700K |  HD 630
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

MacMan said:
In theory it should work since it uses the GK104. But since it's dual chips it will most likely need some kind of modification of the kexts to work.
Click to expand...

Here it worked OOB (GTX 690 EVGA).
 
Article: 10.8.2 Brings Complete Native Support for NVIDIA GF100, GF110 and GK104

MacMan said:
The Greater than 2GB Patch in MultiBeast 5.0 is broken. It will be fixed in MultiBeast 5.1.
Click to expand...

Thanks MacMan :) Great news.

I see new graphics card using more than 2Go
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top