Search results

Mac OS Open Border

300 Mb/s down and 30 Mb/s up.

I also have a RAM problem with the Asus Z170-P. I cannot put any RAM in slots DIM_A1 and DIM_A2. If I do then the computer appears to start but with no video. I think this is a problem with these Z170 Boards as I have just watched a video of somebody with a Z710-P D3 ) with exactly the...

I have 2 Samsung 500GB SSD 850 EVO's in software raid as my boot disk. I get really good speeds.

I agree. I always create a new 'Hackintosh Recovery Partition" with an OS X minimum install just for situations like this. I only apply updates to it when I am certain they are fully functional.

Article: Building a CustoMac: CustoMac Mini 2012 Very easy to do. I have one in my Hackintosh HTPC and it works perfectly.

Article: OS X 10.8.2 Update GA-Z68XP-UD4, ATI Radeon 6870 1GB, 16GB Corsair RAM, Intel i7 2600K, 120GB Corsair Force 3 SSD, 128GB Crucial M4 SSD Success with combo update. All I had to do is remove OEMsmbios.kext from /system/library/extensions, reinstall audio from multibeast and...

I have been using this keyboard for nearly a year and I can say that its excellent to use. Works with my Hacintosh, including Sleep and Wake. I prefer a non bluetooth keyboards because they always function when editing the BIOS or accessing other operating systems.

Thanks, this worked for me. Remember to Repair Permissions and rebuild Kext Cache. I used "Kext Utility.app", it worked a treat.

Article: OS X 10.8.1 Update It panic was related to SyncMate so I uninstalled it. I had replaced AppleAHCIPort.kext and IOAHCIFamily.kext with the ones from Lion as I was experiencing really slow boot times. It appears that 10.8.1 does not like the Lion versions of these kexts. I...

Tried to update by downloading the OSXUpd10.8.1.dmg from the Apple Website. Installation Failed and when I rebooted it loaded all the extensions and then I got a kernel panic. Had to restore my boot drive back up 10.8.0 using a backup. Update : Tried to apply the update via the App...

Worked for me too.... I used Kext Utility to install the 2 kexts as it creates a backup of the current kexts. Mountain Lion boots much faster. Thanks! GA-Z68XP-UD4, i7 2600K, 16GB RAM

I can confirm that both solutions enable a successful boot into the ML installation program: 1. Connnecting the Intel built in graphics (i3, i5, i7) to your monitor and then running the Mountain Lion Installation 2. Using the HD 6870 but removing the ATI6000Controller.kext from the...

I have the same problem but a different motherboard and processor (GA-Z68XP-UD4 and i7 Sandy bridge). I think it could be down to Graphics card support in the installer as I have the same one as you. I may try and boot connected to the built in HD3000 graphics.

Just received my Macbook Pro IR board from http://www.powerbookmedic.com/ and soldered it onto a USB cable and it works flawlessly. Waking my HTPC with the remote is a bonus. I am using Remote Buddy to enhance the functions of the remote. :D

All I did was copy the new DSDT to the EXTRA folder as DSDT.aml (no need to run Multibeast) and then flash the bios. After flashing the BIOS did reset to the default settings so I had to boot into the BIOS and correct them i.e HPET 64 bit mode, SATA to AHCI mode.

I have updated my H61N-USB3 to Bios F8 and added the F8 DSDT with HDMI audio. I can confirm that everything is working great. The sleep issue I had on F3, where the computer would restart on wake, has now disappeared. Thanks you everybody involved for all the hard work. It is much...

Yes they are all checked. One thing I do have are 2 hard drives connected to the internal SATA ports and a DVD drive connected to the external Esata Port. I disconnected the Dvd drive but the same thing happened. I suppose I am clutching at straws. Other than that I only have a...

I am having a similar problem to you. Everything is working great apart from Waking the computer. The computer goes to sleep fine but when I either press the power button or keyboard to wake it , it just restarts. I have looked in the OSX Console but cannot find anything obvious. I...

You need to ensure that the OSX hard drive is plugged into the first SATA port on the motherboard. Seems like your windows hard drive is first.