Search results

Currently so Far as I’m aware the only new motherboard with a native onboard thunderbolt 3 type c connection is found only on the Asrock phantom gaming mini Itx motherboard. I have a micro center near me and I opened up all the different brands of new Z390 boards, and found most have the Aic...

In my research on thunderbolt the biggest problem seem to be the discontinued thunderbolt aic cards by gigabyte and Asus. In my area only microcenter has a solution for this. Asus z370 prime-a motherboard with the Asus thunderbolt 3 aic card. Microcenter informed me that manufactures (Gigabyte &...

Audio Interfaces......... Have you gone out and Bought a Firewire card that powers the firewire bus ??? Please check Presonus website and get a card with recommended firewire chipset, and put that in your Hack. Also go to Presonus website and download latest drivers for lion for your control...

A Hack, Presonus Audio Interfaces, Studio 2 Professional = Pure Heaven.

Looking at your motherboard specs, things appear to be in your favor for trying snow leopard or lion. But you do have old Ide connections. Biggest thing to check is in bios. Does your Bios support ahci ?? You cannot boot an ide device or load OS X in my experience. If your bios does support...

Make sure your using a ethernet connection plugged into one of your ethernet ports on Motherboard. Run Multibeast. Go to network part of Multibeast. Run Aetheros selection and restart when done. Go back to multi beast and run the one for apple intel. Restart computer. That should get you your...

If you read my entire posts, NOT ONCE did I say it would not work !!! My whole point has been to make it as easy and painless as possible !!! Matched Motherboard chipsets To Matched Processors is easier to deal with because of that !!!! Most posts in this thread deal with a Sandy Processor with...

Don't forget your thumb drive AND your Hard Drive must have a ivy bridge helper. Either 4.01 or 5.0. First step is to load and boot with thumb drive that has been created with unibeast (see the related forums on how), You have to run Bridge helper on thumb drive, after you have successfully...

Bottom line is for people to read the How to installations and the golden builds part and then query whether this part you have or that part will work. These are hackintoshes on this forum NOT A MACINTOSH. So of course not all things are going to work or work correctly if at all. That's why you...

Mac Guy in particular, Ivy Boards have a onboard video output to work with hd4000 graphics the best. YES you can use a SANDY Bridge proc. But WHY would you when you will only get hd3000 graphics. READ all the posts with the problems of trying to use Sandy hd3000 graphics with the Z77 chipsets. I...

You should now have a Stable Lion setup on that board !!! I would stay with that board and change your processor to a i7 3770k processor. I have set up this particular board 31 times for people with lion, following above steps. Other notes I didn't mention due to space. When you set up your lion...

People, people people !!!! When you are you going to learn to use a matched Board and processor ??? If you bought a sandy processor, USE A SANDY CHIPSET (Z68 xxxxxxx). If you bought an Ivy processor USE AN IVY BOARD !!!! (Z77xxxxxxxxx). Step 1. Go match your system Board and processor). Step 2...

Also people please understand this as Tony Mac has addressed this issue before. These are Hackintosh's NOT Macintosh's. Therefore you cannot take an apple recovery disc, a hard drive from an iMac, G5 ect, and make it work in a hack. If you could, there would be no need for a Tony Mac forum. Also...

Run all video off of YOUR video card if you expect full resolutions. Yes I have tried 2 or 3 ATI and 3 Nvidia cards. I am able to run at full resolution both dvi ports and a hdmi or mini hdmi depending upon the card. What I have noticed in your Monitor section in system prefs is the types of...

Yes integrated graphics (hd4000) work beautifully at 1024x768. That is your one and only choice. If you want 1920x1080, get a graphics card !! Or wait till Tony Mac team has a hd4000 driver. Most of your problems from what I see and hear you saying stem from picking and choosing how or what you...

Please read previous posts on Tony Mac here as well as Graphics Installation. You mentioned no graphics card... Please read forum completely and you will see post after post of on-board graphics not working. Tony Mac has been announcing that they are working on a driver..... If you have to have...

Sounds like you made too many changes. i would wipe the drive and start over. I would first boot into bios on your board and set it to load optimized defaults. From there please follow Tony Mac guide on bios settings. Biggest thing to check is to make sure all drives and controllers are set to...

Earlier posts said you had a video card, plug it in and use to set your hdmi out with the onboard. your hdmi in displays will be display x with stuff under it like 1080p, 1080i, 1600X900 act. you need to pick 1080p for correct refresh rates. Now make in displays your hdmi output your primary...

Try plugging in your dvi cable and see if you are getting a picture that way. Also I have found that NOT using multi beast (Easybeast) and just booting from r-boot discs, work best in giving you a full resolution and DVI and HDMI working. I am willing to bet that your desktop is being output to...

What are your connections ?? You can only use two ports at a time... Such as DVI and HDMI. I believe the issue is you have a monitor(s) that have inputs for VGA, HDMI, DVI and you have two or three all plugged in, and Lion decides after startup that it is going to send the signal to your HDMI...