Search results

@Yomiro I did it from Windows (dual boot) and it worked like a charm! Verified with blackmagic that i now have 3.0 speed on all ports :) I hope the other quirks i've been dealing with will go away too.... @UtterDisbelief I thought that i needed the EHCI and that the USB 2.0 mappings would...

Is the only way to install Catalina? https://www.tonymacx86.com/threads/the-new-beginners-guide-to-usb-port-configuration.286553/post-2315201

Current config attached. I have not used USBinjectall since corpnewt's tool said it wasn't necessary, but maybe i should?

I'm missing SS ports and USB devices are behaving weird. I only have 15 entries for each controller in corpnewts tool and the EHC1 is not working at all. ioreg -l -p IOService -w0 | grep -i XHC1 and ioreg -l -p IOService -w0 | grep -i EHC2 returns nothing. ioreg -l -p IOService -w0 | grep...

https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/opencore-issues.html#can-t-see-macos-partitions This helped me

Stumbled upon this thread in my research: For future reference, i cannot get POST without CSM enabled on asus z97-p with RX580. Tried both HDMI and DP (don't have DVI-cable). Works fine with CSM enabled, except low res in clover.

yeayea, they both work on their own, but i need two dp outputs, that's why :)

Nvm... Too much hassle, i'm buying an RX 580....

It appears that some applications defaults to my "weak" graphics card: nvidia quadro 410. Photoshop states this explicitly (Open GL via 410) in the settings. It cripples the whole machine - everything lags. I suspect it's the same when i render video, since also Skype video will make the whole...

This works perfectly and is dead silent: Running Heaven (which i didn't dare to do before): Ty! I just need to mount it somehow ;) Mounting to the chassis wall will be annoing i think, since that's the removable wall. For future reference: The highest temperature i got was 83 deg - seemingly...

Just bought a quadro 410 - works fine and only has a max. power consumption of 38W. The fan constantly runs at 2800 RPM and is pretty noisy though. I can read speeds and temps, but not control with Mac Fan Control. With the fan running the temp. is around 40 deg. celcius. Without the fan...

Well after unplugging repluggin the card a couple of times, and then settings the -v flag in clover, it suddenly works... maybe just a loose connection? 4K 60hz on both 770 GTX and Quadro 410! The ladder a little more sluggish sometimes, but acceptable :) Hope it stays this way! It is now the...

I just bought one, that wont boot in either windows 10 or macos. In both macos and windows i get to the bootscreen, but then shortly after black screen. Tried windows from clover and directly to windows bootloader. The quadro 400 doesn't support UEFI, but the 410 should support UEFI from what i...

Confirmed working on Z97-P // 4790K running Mojave. Safari updated as well. Chose the macOS install volume in clover 2 times. So far no problems, but had about 2 minutes of black screen during the update after the second reboot. CCC'ed before. And now i see there's a 006-update pending :)

Well yea it worked with the iGPU enabled, but i chose to do the plist-edit because it just renders the quicklooks faster (guess it must use software-rendering or the PCI-e GTX770) and then disabled the iGPU again. Also i use whatevergreen.

I fixed the problem by reenabling the iGPU, but the solution with the .plist edit makes the previews much faster!

Wow rehabman, you really have referred to the same stuff a lot of times ;) I had similar problems with no hidpi-settings, turned out I hadn't removed the .plist extension. I'm now running 1080p (hidpi) on an external 1440p (base) screen - looking great. My way there: - Get IORegistryExplorer ->...