Contribute
Register

Gigabyte Z270X ULTRA GAMING - i7 6700K - GTX 1060

Status
Not open for further replies.
By default, macOS will only show the stock CPU GHz.

I don't know what your hardware is at all. Please fill out your profile to show some info so it's easier for others to help you.
 
@jimmakos01
I will be following your guide between today and tomorrow to get my system up and running. Our build are similar. I have the Gigabyte Z270N-wifi and i5-7600k. Everything should be pretty much the same I would guess, including getting the graphics card functional. Do you know if the display port works on the card?
 
sumsaykra-z said:
@jimmakos01
I will be following your guide between today and tomorrow to get my system up and running. Our build are similar. I have the Gigabyte Z270N-wifi and i5-7600k. Everything should be pretty much the same I would guess, including getting the graphics card functional. Do you know if the display port works on the card?
Click to expand...

I have't test it, but i believe that you should be fine.
 
JimmakoS's iMac Pro
Z390 AORUS MASTER |  i9 9900K |  Radeon Nitro+ RX 5700 XT 8GB
Update for the setup. From my previous build i had a DW1560 wifi & bluetooth card but the motherboard had no place for this chip. So i bought a pci adapter for the card from ebay.

http://www.ebay.com/itm/NGFF-Wirele...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

The installation was very easy, after that i installed FakePCIID,FakePCIID_Broadcom_WiFi,BrcmPatchRAM2,BrcmFirmwareData in S/L/E via Kextbeast and in clover put the fvco patch and everything working very well.

Screen Shot 2017-09-20 at 19.15.25.png
 
JimmakoS's iMac Pro
Z390 AORUS MASTER |  i9 9900K |  Radeon Nitro+ RX 5700 XT 8GB
This is the guide I've been looking for!! I have practically the same setup as you. I've never built a hackintosh before so I'm excited to follow this guide tomorrow to get mine running. Thank you so much for this
 
MatthewMcGuinness said:
This is the guide I've been looking for!! I have practically the same setup as you. I've never built a hackintosh before so I'm excited to follow this guide tomorrow to get mine running. Thank you so much for this
Click to expand...
I'm glad to here it. You will love your setup.
 
JimmakoS's iMac Pro
Z390 AORUS MASTER |  i9 9900K |  Radeon Nitro+ RX 5700 XT 8GB
This worked perfectly thank you so much!! The only thing that isn't working yet is HDMI audio but I can live with that for right now.

Screen Shot 2017-10-05 at 11.13.49 PM.png


One question I do have is; does your RAM show up like this in about Mac? I read the mobo manual and it said to have it in slots 1 and 3 but this looks like its in 2 and 4?

Screen Shot 2017-10-05 at 11.25.02 PM.png
 
MatthewMcGuinness said:
This worked perfectly thank you so much!! The only thing that isn't working yet is HDMI audio but I can live with that for right now.

View attachment 283491

One question I do have is; does your RAM show up like this in about Mac? I read the mobo manual and it said to have it in slots 1 and 3 but this looks like its in 2 and 4?

View attachment 283492
Click to expand...

I will take a look at afternoon. But, I believe that is not a problem.

For the HDMI audio, I haven't tested, because I have Harman Kardon Soundsticks and the connection is through 3.5 jack.
 
JimmakoS's iMac Pro
Z390 AORUS MASTER |  i9 9900K |  Radeon Nitro+ RX 5700 XT 8GB
MatthewMcGuinness said:
This worked perfectly thank you so much!! The only thing that isn't working yet is HDMI audio but I can live with that for right now.

View attachment 283491

One question I do have is; does your RAM show up like this in about Mac? I read the mobo manual and it said to have it in slots 1 and 3 but this looks like its in 2 and 4?

View attachment 283492
Click to expand...
Hello, I have the same setup! But i can't the nvidia 1060gtx run with Web Drivers. Do you do any special config? thanks!
 
Please be more specific than "I can't the Nvidia GTX 1060 [to] run with Web Drivers." Is the problem you select the Nvidia drivers in the Nvidia System Preferences pane, and the setting doesn't hold across the reboot?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top