Contribute
Register

Dell Precision 5510 (Almost same as xps 15 9550) Corrupts disk

Status
Not open for further replies.
Tried that too, but it fails repairing it.
The volume could not be verified completely.
File system check exit code is 8.
File system verify or repair failed.
Operation failed..

But isn't the ssd in the xps 15 the same as in mine? At least I thought so.
 
gg07 said:
Tried that too, but it fails repairing it.
The volume could not be verified completely.
File system check exit code is 8.
File system verify or repair failed.
Operation failed..
Click to expand...

Fresh install.

But isn't the ssd in the xps 15 the same as in mine? At least I thought so.
Click to expand...

No idea. You didn't provide any details on it.
 
Oh, just noticed that my cpu is different than the one comes with xps 15 9550. Mine's 6820HQ and the common xps's 6700HQ.
And I used this
<key>ig-platform-id</key>
<string>0x191b0000</string>
in my config.plist. Can this be the source of the problem?

That's Gymnae's config. Dell XPS 9550, CPU: i7-6700HQ/HM170, Graphics: Nvidia 960M
 
gg07 said:
Oh, just noticed that my cpu is different than the one comes with xps 15 9550. Mine's 6820HQ and the common xps's 6700HQ.
And I used this
<key>ig-platform-id</key>
<string>0x191b0000</string>
in my config.plist. Can this be the source of the problem?

That's Gymnae's config. Dell XPS 9550, CPU: i7-6700HQ/HM170, Graphics: Nvidia 960M
Click to expand...

The 6820HQ and 6700HQ have the same HD530 graphics device.
 
The chipset is different too. Mine has CM236, the xps HM170. What do you think?
If I do a fresh install, shall I make everything working, and then do the commands you wanted or as soon as I can get it booted up.
 
gg07 said:
The chipset is different too. Mine has CM236, the xps HM170. What do you think?
If I do a fresh install, shall I make everything working, and then do the commands you wanted or as soon as I can get it booted up.
Click to expand...

I don't see what that has to do with graphics or SSD...
 
Ok, did a fresh install. Now with a usb2 pendrive not a usb3 as before.
Made everything working and gathered everything that you requested.
The acpi/patched is from the previous install however I pressed f4 at clover so you can see the originals too.
 

Attachments

  • Archive.zip
    5.5 MB · Views: 82
gg07 said:
Ok, did a fresh install. Now with a usb2 pendrive not a usb3 as before.
Made everything working and gathered everything that you requested.
The acpi/patched is from the previous install however I pressed f4 at clover so you can see the originals too.
Click to expand...

Comments:
- all kexts you need should be installed to the system volume
- power management is not implemented
- ACPI is not patched correctly (the guide is very clear regarding dynamic SSDTs)
- no experience with toshiba NVMe SSDs (maybe Pike's NVMe patches are not compatible).
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top