In your signature there are two Z370 systems, does this apply to both? Or even better, to all Gigabyte Z370 series motherboards that include thunderbolt option?
I am in the process of researching parts for my next hackintosh, and thunderbolt with working hotplug is high on my priority list. I...
Just returned from my vacation and found reply from miketks10. Now it works perfect for me. After replacing the rc.wakeup code with the one from post #4 EFI partitions are no longer mounted on wakeup.
You made my day man. Thanks!
Thank you for your time and effort put into doing this. It works great.
There is only one thing: after waking, my usb drivers are mounted back properly, but so are their corresponding EFI partitions (as I am using GUID partitioned drives). Not a biggie, I can unmount those manually after...
Here's what I found on ****** while googling on the subject. It works for me.
Edit the file
/System/Library/Extensions/NVDAStartup.kext/Contents/Info.plist
and change the value for NVDARequiredOS from 14C109 to 14C1510
Then, in terminal, execute
touch /System/Library/Extensions
and...
Yes, it will work just fine, but don't try installing anything older than 10.8.5 because the kernel needs to have support for Intel Haswell CPUs.
There's another thread with confirmed success on that motherboard: http://goo.gl/Q5wTPs
The kext for your onboard NIC: http://goo.gl/0nrBvF...
Well, technically Macs don't require a discrete graphics card. My system works great with dual monitors using only Intel HD 4000 (i5 3570k.)
However, iGPU on hackintoshes works only for digital outputs (DVI, HDMI, DP) and since your motherboard has only VGA connector, you will need a discrete...
No AICPUPMI info after sleep
Hello!
I have a fresh retail install of 10.8.5 on my hardware. Added only FakeSMC.kext, RealtekRTL8111.kext, VoodooHDA.kext, lspcidrv.kext, and AppleIntelCPUPowerManagementInfo.kext.
Flashed the patched bios from http://biosrepo.wordpress.com/asrock/z77/ ...
well, since you don't have anything to compare, here is the abstract from the guides I used
ControlFlags:
Decode the ATI/AMD ROM Output ATY,ControlFlags:
0×0002 : LVDS, ControlFlag : 0×0040 and 0×0100
0×0004 : DVI, ControlFlag : 0×0016, 0×0014, and 0×214
0×0010 : VGA, ControlFlag ...
is there any framebuffer personality that gives you anything on either dvi port?
this way is much harder - there are too many possible ControlFlag/Transmitter/Encoder combintaions to try out.
Well, HEX editing the personality is just the final part of work needed here.
First, you need to check which framebuffer personality at least partially works with your card.
Does booting with AtiConfig=Gibba give you anything on any of your displays at all? If not, it would be better to...
EDIT:
***IMPORTANT***
It seems that this card works (properly) only with Chameleon versions up to 2210.
Newer versions (2215 and up) just won't recognise the card and NO framebuffer personality is loaded (regardless of input type and/or number of displays)
After reporting ^^this^^ to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.