Thank you Shiloh for your continued support. I was wondering if there are any specific comments you have on getting the RIV BE with 4930K to work with an NVIDIA 1080.
I think I read that this video card specifically requires sierra. So I am looking at doing fresh sierra install. In addition...
I gave up on sierra and went with El Capitan. No probs so far. I did have a glitch a couple of weeks ago when a ram stick went bad and it wouldn't boot even after I removed the bad stick- I guess the memory config is hard coded into the boot config for clover. Once I replaced the ram all went well
I am having the same problem after removing one of my ram sticks that went bad.
https://www.tonymacx86.com/threads/new-kernel-panic-on-boot.212894/#post-1420142
So where do i find config.plist on the el capitan usb install to edit it?
I had a functioning El Capitan install on a samsung 850 evo. Then one day the system crashed and it turns out one of my ram stcicks went bad. I took out that stick and am now down to 8 gb. Now I get this:
I try to boot from clover on a usb stick and get the same error. I try to boot to the...
SOLVED: turns out clover installed with unibeast for El Cap doesn't like a second OS. The options used by unibeast to install Sierra don't work for ElCap.
Got ASRock H97m-itx working with the help of webstar here.
I had to do TWO THINGS
1)put the 3 kexts into the EFI/Clover/10.12 (the two discussed here and USBInjectAll.kext)
AND
2)actually type in these entries in the kext section of clover configurator(to increase the port limit)
Name =...
Ok, so my brain is really not working. I did not realize I had to do TWO THINGS
1)put the kexts into the EFI/Clover/10.12
AND
2)actually type in these entries in the kext section of clover configurator
Name = AppleUSBXHCIPCI
Find* [HEX] = 83BD74FFFFFF10
Replace * [HEX] = 83BD74FFFFFF1B
So guess...
I first installed Sierra onto an eve 850 sad on an ASRock h97m-itx. Worked fine. Then I installed Yosemite to another partition on the same SSD according to the guide using unibeast had no problem during installation. On restart, clover gave me boot options - two internal hfs partitions and two...
Thank you for those helpful links. However, I am missing something more fundamental.
In Clover configurator 2, after mounting the EFI partition and looking under the Kernel and Kext Patches heading on the left, I only see one checkbox marked, Apple RTC
The sections beneath (KextstoPatch...
weird. I also checked the three options for usb in multibeast as shown in the photo you posted. Using multibeast 9.0.1
My system report for usb is attached in the image below. As you can see, it shows my Logitech wireless keyboard receiver which is plugged into the usb 3 port. I also have a DAC...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.