My system is giving me some troubles since I upgraded my GPU form a 6870 to a R280X, plus 2 new screens (total of 4)
Let start by how my screens are connected.
First screen is connected directly to the onboard GPU (HD3000) by DVI.
Attached to the R280X I have 2 screens using a mini-display to...
having the same problem, unfortunately i can't find this line which need to be deleted :-(
Have already opened org.chameleon.boot.plist and com.apple.boot.plist and both without any luck.
Do you have any other solution?
I already tried HDAEnabler and ALC889 but none is working.
My system is...
Guide for Installing on Z68X-UD3H - i7-2600K - HD3000
Thanks for this.
System is running fine, i Message included.
This are the steps I followed.
-Made a Unibeast USB (had some problems first, installation failed. Until I found out that my 4gb stick was to not big enough)...
I have no idea if my BIOS lets me List the Reverse Partition as one.
My main board is from Gigabyte: GA-z68x-ud3h-b3 wih latest UEFI bios.
About re-installing Windows. As my Windows 8 is an upgrade i need to install Windows 7 first.
Is this the way to do it?
Start my system, Press F12 (boot...
OK, that is no so good news, but if that is the only solution then it as to be done.
Only thing is that I have NO idea how to launch the installer in BIOS mode.
I had a good running windows 7 system, did the windows upgrade but after it was finish windows would not start.
After a while I found...
My system was running fine with two different SSD's.
OSX 10.8 on the first one and Win 7 on the second.
Yesterday I upgraded my Windows 7 to Windows 8.First time I restarted the system , Windows 8 started as main OS.
I changed the boot sequel and now I get my bootloader as usual. There I see...
Just want to tell that problem as been solved.(who knows if somebody has the same problem)
Solution was using the Intel SATA connector instead of the Marvell I used the first time.
After I changed both SATA cables to the Intel connector, OSX SSD is now first boot device.
(SOLVED) UEFI bios clear even with AppleRTC and ElliotForceLegacyRTC
I just upgraded my system with this same motherboard together with a i5 2500K.
OSX is now running next to Windows 7 64 bits after following Alfas147x guide (thanks for that).
OSX is running fine but only having two issues...
very strange.My ATI 5870 is giving problems.
When using 10.7.4 there was not the issue, but since I installed 10.8, QI/CI is no longer working.
Already tried GraphicsEnable=Yes, but that did no do the job.
System is using own made DSDT (using DSDT auto patcher) and was installed using Unibeast...
I am having the same problem.Tried almost everything.
After reading about chimera I followed next steps: (on my 10.7.4 system)
-Prepared USB drive (usual way)
-started Unibeast ML 1.5.2.
When Unibeast was done I downloaded Chimera 1.11.0 and installed on the USB drive.Also placed my DSDT.aml...
You need to FIRST install Win 7 and then OSX ML.
Best you can do is make a copy of ML using time machine.
Install Win 7, then start ML installation using a USB and then install from Time machine.
In my opinion the fasted way.