Recent content by onemetal

NEVER MIND! TONYMAC BEAT ME AGAIN MULTIBEAST 9.1.0 SOLVES THE PROBLEM

Hi guys, I am adopting an early Z270 Gigabyte Gaming 5, i7700k, Corsair 32gb, Sandisk SSD 480GB, 3 HD of 2TB Each. So far the installation went super easy, no trouble whatsoever, using Unibeast 7.1 Sierra. The only thing that is not working correctly is the Intel High Definition Graphics 630...

I have been hackintoshing for many years now. Ever since the Leopard version was out. I have successfully resolved many if not all of the issues and problems a mackintosh has. But recently one issue has been driving me crazy, I installed Sierra and the computer crashes continuously out of...

Thanks! Disabling the usb 3.0 did work!

Hi Guys! I need some help! I am trying to update to Sierra on a Gigabite Z68MA-D2H-B3 with Nvidia 520 card. Bios are correctly configured. All the installation goes well, until it has to reboot after Multibeast 9.0.0 installs the Clover. I have tried both UEFI installations and Legacy boot...

You can install Multibeast starting from USB and then redirecting to the freshly installed HD. What is wrong is that Clover once installed in the HD will get stuck on starting

Hi Guys! I need some help! I am trying to update to Sierra on a Gigabite Z68MA-D2H-B3 with Nvidia 520 card. Bios are correctly configured. All the installation goes well, until it has to reboot after Multibeast 9.0.0 installs the Clover. I have tried both UEFI installations and Legacy boot...

The latest update 10.9.3 will solve the problem with Apple remote 3.7 Clean install highly recommended.

To those looking for a solution to controling remotely the 10.9 maveriks and Apple Remote does not work, and RealVNC is not working either, the only solition I could came up with was Teamviewer. It is free for non comercial use. And it works. But for the moment Hackintoshes will not work...

Since the installation of Maveriks I seemed to have lost the ability to control hackintoshes with Apple Remote 3.7 and previous, and the RealVNC app 5.05 and previous. I am not certain what happened but I have tried all combinations I can think of, Firewall on, Firewall off, adding the...

Now this update turned out to be more difficult to install that previous Combos in my computer. I had to do a fresh install with Unibeast and ML 10.8.2 on it. The installation itself goes very smoothly. Once installed is another thing. I had to take the AppleHDA.kext and AppleACPIPlatform.kext...

Ok Guys I finally made it through. This is how it goes: 1. Turn off Onboard Video in the Bios for the initial install. 2. Use a Nvidia 9600 during the USB install. 3. Once inside the OSx use the AppleIntelHDGraphics kext from OSx86.net and kexthelper. 4. Use MultiBeast 4.4.0 with EasyInstall...

I will try later on with an Hitachi 500 gb drive. And will let you know. Thanks.

Ok, First of all Thanks Jester969, your comment was right on the money. What I did: I used a NVIDIA PNG Verto 9600GT from another computer, just to make the initial boot. In the BIOS I turned off the OnBoard Video. Once I got inside OSX I used the AppleIntelHDgraphics.kext (look it up at...

I am getting stuck on com_inx2mac_RealtekRTL01xx: Ethernet address 50:e5:49:50:d6:ee The board has an I5-2310 and 8Gb of DDR3 Kingston RAM in sockets 1 and 3. What is causing this problem? I have tried disabling the LAN from Bios to no avail. Have tried GraphicsEnabler=No same result. Help!