Pci Configuration Begin Crash

[onemetal]

Hi Guys! I need some help!

I am trying to update to Sierra on a Gigabite Z68MA-D2H-B3 with Nvidia 520 card. Bios are correctly configured.

All the installation goes well, until it has to reboot after Multibeast 9.0.0 installs the Clover.

I have tried both UEFI installations and Legacy boot. But both get stuck on reboot at [ PCI Configuration begin ].

I also have tried many flags and their combinations. But I am missing something I am not seeing.

Has anyone also faced this problem and solved it?

Thanks.

Onemetal

 

[DC27]

Having the same problem with z68MX-UD2h-b3 Nvidia 210. Someone please help!!

 

[VioletDragon]

Hi Guys! I need some help!

I am trying to update to Sierra on a Gigabite Z68MA-D2H-B3 with Nvidia 520 card. Bios are correctly configured.

All the installation goes well, until it has to reboot after Multibeast 9.0.0 installs the Clover.

I have tried both UEFI installations and Legacy boot. But both get stuck on reboot at [ PCI Configuration begin ].

I also have tried many flags and their combinations. But I am missing something I am not seeing.

Has anyone also faced this problem and solved it?

Thanks.

Onemetal

Have you tried booting with npci=0x2000 or npci=0x3000?

 

[DC27]

Hey, I fixed mine by going to bias, disable VT and disable usb3.0 chipset, in my board I have two and had both of them disabled then voila!! Hope it helps!

 

[onemetal]

Thanks! Disabling the usb 3.0 did work!