Like every other flippin news article in 2020 stating Unprecedented event... :crazy:
Confirmed successful install on OpenCore 6.1 z390 Aorus pro build. Be patient if loading bar doesn't seem to be progressing. Many reboots.
Upgraded (from 10.11) to 10.13.6 using this post as the main guide.
Very similar hardware. :headbang: Now messages works.
Will investigate the CMS disable thing, cause I've noticed boot time is slightly longer now.
Cheers ears.
I noticed this as well. But it didn't happen right away, I think it was after installing the most recent security patch avail for 10.11.6. Then found this post.
Using the chflags command;
Show hidden folder
$ sudo chflags nohidden /example/folder
(I needed to use -R argument to show the...
Did you figure it out?
Obviously you are doing this? right
sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
if you haven't already. Try shutting down > disconnecting network equipment(take out wifi card) disconnect ethernet
then reboot
sudo rm...
and this:
http://www.playtool.com/pages/psuconnectors/connectors.html#4into8
Just in case anyone else was in my shoes and new to this.
"
Motherboards can come with either a 4 pin 12 volt connector or an 8 pin 12 volt connector. Many power supplies come with a 4+4 pin 12 volt cable which is...
http://www.overclock.net/a/gpu-and-cpu-power-connections
Think that answers that then...
TDP of the CPU shows that using just the 4 pins in the 8pin slot is ok.
""
If your processor is an i7 4770 at the stock clock, according to the specifications, it uses a maximum of 84 watts. All CPUs use...
Hi All,
Using GA-Z87MX-D3H with a i7-4770.
The 8pin connection on Mobo for CPU only appears to have pin hole shapes that match up with one of the PSU 12v CPU cable, despite the cable having 8pin one end that fits to PSU and 8pins other end - split to 2 4pin plugs.
I've read on forums mixed...
Hi all,
Same issue here. desktop background changing back to default after shutdown/boot backup.
My setup is OS and user folder on SSD. Then symbolic links to docs/downloads/pics(desktop backgrounds) etc to spinning drive.
Two screens attached(screen and projector). All of the suggested fixes...
Hi all,
Same issue here. desktop background changing back to default after shutdown/boot backup.
My setup is OS and user folder on SSD. Then symbolic links to docs/downloads/pics(desktop backgrounds) etc to spinning drive.
Two screens attached(screen and projector). All of the suggested fixes...
Hey Caruso81 - Just a thought of how a situation like this could be sped up. That is by changing the layout of where data is stored. Could always have your user data on another volume/disk? that way there would be less to restore back over the slower connection. i.e just settings/plists/library...
Hi 74ltgeorge,
May I ask why this was needed? how did you discover this was causing an issue?
I'm using the Z87MX-D3H mobo among other things(see sig) but similar build from what I can see
The version of Mutlibeast used let me install AppleIntelE1000e v3.1.0a
I have only done this OS 10.10...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.