Guide To Install Yosemite on HP Laptops with Clover UEFI

[RehabMan]

Hello. First of all, I have to say thank you for all your work, guys. I really apreciate it.

I have followed your guide since 10.8 (rehabman) and 10.9 (clover guide). And everything was OK, I allways installed the OS from USB installer.

This time, with my probook 4330s (i5 2410m, HM67, HD3000 1366x768, AMD graphics disabled in BIOS like always), I can't entry in installer and language screen in the usb installer. I've followed your clover guide many times, and made 5 o 6 different USBs. I used the config.plist from your dropbox folder (HD3000 1366x768 one). I've tried too with your "mini-ssdt" (renamed, of course). I know that all I made is following properly your guide, but when I try to boot the installer, I have a white screen with spinning mouse and language doesn't appear. I've tried method 2a and 2b many times, the partitions were OK too, and I copied always your EFI folder to CLOVER partition root, as always.

I've tried too with verbose mode to check problems but everything ends in the white screen, so, I can't see log after that. Tried too without cache, deleting genericusbxhci kext, and with/without injected intel graphics. Everything ends in the white screen.

Here is my config.plist, I hope you can help me.

By the way, now im running 10.10 thanks to your updating 10.9 to 10.10 clover guide, it was perfect. But I need the clean install too.

Thank you anyway

Per post #296, set Graphics/Intel/Inject=false. And use Mini-SSDT.aml to EFI/CLOVER/ACPI/patched/ssdt.aml.

 

[RehabMan]

Good morning,

After a long night i haven't successed to put wifi to my laptop in Y. Is there any way that i can take the driver from Mavericks which is working and install it in Yosemite?

Thanks

Define "the driver"...

 

[Riaan12]

Okay correction seems like everything accept my USB3.0 is working

 

[alexmenn]

Per post #296, set Graphics/Intel/Inject=false. And use Mini-SSDT.aml to EFI/CLOVER/ACPI/patched/ssdt.aml.

I already did it RehabMan. I changed the config.plist and add the mini-ssdt to EFI/CLOVER/ACPI/patched/SSDT.aml and didn't work. What more can I do?

 

[RehabMan]

I already did it RehabMan. I changed the config.plist and add the mini-ssdt to EFI/CLOVER/ACPI/patched/SSDT.aml and didn't work. ...

It is not demonstrated by the files you uploaded.

 

[Riaan12]

Okay correction seems like everything accept my USB3.0 is working

My USB3.0 works when I boot when I boot with storage attached to it.

Also followed and used this: http://www.tonymacx86.com/yosemite-...-rehabman-kexts-builds-binaries-yosemite.html

Seems like plug and play is the problem here...

 

[nightfear]

Define "the driver"...

As I told you don't know much in Macintosh. So...
In Mavericks my devices are working fine. As Apple says if you Laptop can install Mavericks can Yosemite. Of course I don't have Mac Laptop but an HP. But... my devices are working fine in M and I can take the .kexts or the files needed and copy them to the right folder of Y and make them work.
Thank you.

 

[rob1980]

As I told you don't know much in Macintosh. So...
In Mavericks my devices are working fine. As Apple says if you Laptop can install Mavericks can Yosemite. Of course I don't have Mac Laptop but an HP. But... my devices are working fine in M and I can take the .kexts or the files needed and copy them to the right folder of Y and make them work.
Thank you.

Just follow the guide on post 1 and all should work ok

 

[justein230]

I was wondering if it was possible to get a resolution of 1366x768 on the bootloader screen. I tried changing the ScreenResolution under GUI in config.plist, but it stays as 1024x768,

 

[RehabMan]

I was wondering if it was possible to get a resolution of 1366x768 on the bootloader screen. I tried changing the ScreenResolution under GUI in config.plist, but it stays as 1024x768,

Only if you disable CSM.