Guide To Install Yosemite on HP Laptops with Clover UEFI

[M4C1U5]

Followed the guide, got it installed after a good couple of attempts. When I got to hp probook installer at end it gave warning about f4 not being pressed even though I did. After using Yosemite and updating progs via App Store etc everything was fine apart from audio, usb3 not working and also battery percentage not showing - I have a 4530s with low res screen - I brought across data from my CC clone and noticed sound started to work on a user account. So I ran the probook installer again. This time after getting to the clover screen it starts to load Yosemite, then blinks and then the screens starts to white out, and two visible black lines appear, think I've either not selected the right screen option in the HP probook installer or something else has happened, hiw can I fix this - any ideas? - ps noticed some options at the clover screen can I use these?

Thanks

can u show me ur dumplog file? clover/efi/clover/acpi/origin

------
Ok once more reinstall
Clover start f4 and start osx, start PBI CE uncheck DSDT patcher (i always check that my bad ;/) no information about f4, restart and this same, no wifi, no usb 3.0, no sound ;/

 

[nguyenmac]

Why u want to support me? Im doing something wrong and u pissed off because of me?

Because you didn't read the big red lines in the guide. I wonder why you can ignore it like that.

 

[nguyenmac]

followed the guide, got it installed after a good couple of attempts. When i got to hp probook installer at end it gave warning about f4 not being pressed even though i did. After using yosemite and updating progs via app store etc everything was fine apart from audio, usb3 not working and also battery percentage not showing - i have a 4530s with low res screen - i brought across data from my cc clone and noticed sound started to work on a user account. So i ran the probook installer again. This time after getting to the clover screen it starts to load yosemite, then blinks and then the screens starts to white out, and two visible black lines appear, think i've either not selected the right screen option in the hp probook installer or something else has happened, hiw can i fix this - any ideas? - ps noticed some options at the clover screen can i use these?

Thanks

can't you read the damn red big lines in the guide?????

 

[dermeisterPR]

Hi,

This is my first post here on these forums and have been working with OSx86's since august of this year. I've been following these Clover/Probook/PBI forums since a couple months back, when I successfully converted my 2570HP Elitebook, to a fully working Mavericks Hackintosh (minus iMessage). Big thanks to nguyenmac , rehabman and company for the guides and support to us.

Last weekend I upgraded my fully working Mavericks Hackintosh 2570 elitebook to Yosemite. Problems encountered where No Wifi and No sound. Got those issues solved and now have fully working Yosemite on my 2570 laptop (still no iMessage, but fixed ROM and MLB per instructions on other thread on these forums and now need to give Apple a call to remove the lock)

Now to the interesting part of my Yosemite upgrade (help or opinion needed)

I have Geekbench 3.1.6 and when I had Mavericks ,was registering over 6309 on multicore 64bit.... but now on Yosemite I'm registering 5465. So I decided to do a Clean Install to find out if that could be the problem... and I did the following...

1. Did a clean install using option 2b
2. Successfully booted to Yosemite
3. First thing I did was a Geekbench test and registered a 6289 score
4. Then proceeded with step 13 (HP PBI install) version 6.2.11.2
5. Again did a Geekbench test and registered a 5453 score
6. Continued installing everything else and again have a fully working Yosemite on a 2570p

From what i saw, the lower score is not caused by Yosemite that's for sure. Maybe i'm doing something wrong in step 13 with PBI, or there is some effect in step 13 that causes this lower score. Any ideas??

Thanks for your time and sorry for my first long post.

Any ideas? before I do another clean install And step by step PBI install...

 

[LesForges]

.

 

[Joyfult]

can't you read the damn red big lines in the guide?????

PLEASE GUYS, IF YOU HAVE ANY KIND OF PROBLEMS, HELP US TO HELP YOU FOLLOWING THIS IMPORTANT POINT:

*** If you have any problems, please post troubleshooting files***
***I will not answer any problems if you ignore this***

NO WAY TO HELP YOU IF YOU DON'T LET US HELP YOU.

Thanks in advance!

 

[LesForges]

Hello guys,
I have a small problem.
I have installed the new pbi and by mistake i have selected the full hd resolution in the menu.
Now my osx boots but with a black screen. I have tried safe mode, verbose mode but no luck.
Can i do something to boot up in a low res ?
I have the last clover installed.
Thank you.

Mine did that too. Clover had set the resolution to 1024x768 which my ProBook 6360b couldn't display. There is a boot option to set the resolution, in my case to 1366x768, and once in I could configure Clover to use the correct resolution.
You might find that adding a 2nd screen to the VGA port might display something anyway.

 

[nguyenmac]

Any ideas? before I do another clean install And step by step PBI install...

Use latest PBI to generate SSDT, it will fix yours.

 

[Smalldav]

Try removing the WiFi card (and thus the BT hardware) just to see if it solves the KP.

Originally Posted by Smalldav
Thanks Rehabman, I didn't think of doing that.

Just removed the Wifi card and created a brand new USB (as per the 1st page) and unfortunately it's still coming up with the same error messages/Kernel Panic.

I also tried disabling the Wifi and Bluetooth in the BIOS after the above didn't work but it didn't make a difference.

Any ideas on what might be causing the issue or any other potential workarounds I could try?

Did you try booting without caches (after removing the hardware)?

Check BIOS settings...

You could also try creating USB with Unibeast instead of 'createinstallmedia'...

Hi again Rehabman,

I just wanted to thank you for the help you provided and give you an update on the issue (If you're interested).

I was able to get Yosemite (with Clover) installed and bypass the error message (in attached file) by disabling the Serial Port, Parallel Port and the SD Card reader options within my BIOS..... A bit weird as I never thought these options would of caused an issue and they never have before. I didn't narrow it down any further between the 3 of them but they were the only 3 options I've changed and lo and behold the error happens again if I enable them.

I'm only experiencing one remaining issue now:

I have a HP branded Broadcom BCM943224HMS which wouldn't work until I changed my SMBIOS to MacBookAir5,2 but now it seems to be performing very poorly in comparison to Mavericks.

It's maxing out at around 1-2 Mbps on a 5GHz Wireless N network on Downloads where it was achieving 60-70Mbps previously.

I've tried restoring a Time Machine backup of Mavericks and the issue is resolved but happens again when I reinstall Yosemite.

Any ideas?

 

[M4C1U5]

Because you didn't read the big red lines in the guide. I wonder why you can ignore it like that.

clover View attachment CLOVER.zip
install.log View attachment install.log.zip
AppleHDAIDT.kext View attachment AppleHDAIDT.kext.zip

thats what u need?

oh and my osx reboot for some reasone and now i see my battery and wifi but i doesn't see any wirelles

Anonymous UUID:       98A9ABF2-F714-0DE4-DE30-E2D30AA483EE

Tue Oct 21 04:53:14 2014


*** Panic Report ***
panic(cpu 2 caller 0xffffff800041e80a): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000002ce4000, CR4: 0x00000000000626e0
RAX: 0xffffff80116e3800, RBX: 0xffffff8022957600, RCX: 0x0000000000000000, RDX: 0x7fffffffffffffff
RSP: 0xffffff8108bebec8, RBP: 0xffffff8108bebf00, RSI: 0xffffff8023285000, RDI: 0xffffff8023285000
R8:  0xffffff8022957600, R9:  0x0000000000000000, R10: 0xffffff8000955a60, R11: 0x0000000000000000
R12: 0xffffff8022957600, R13: 0xffffff8023285000, R14: 0x0000000000000002, R15: 0xffffff8023285000
RFL: 0x0000000000010202, RIP: 0x0000000000000000, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x2


Backtrace (CPU 2), Frame : Return Address
0xffffff8108bebb70 : 0xffffff800033a811 
0xffffff8108bebbf0 : 0xffffff800041e80a 
0xffffff8108bebdb0 : 0xffffff800043a443 
0xffffff8108bebdd0 : 0x0 
0xffffff8108bebf00 : 0xffffff800036be13 
0xffffff8108bebfb0 : 0xffffff80004192c7 


BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 slide=0  q.


Mac OS version:
14A389


Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
__HIB  text base: 0xffffff8000100000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)


System uptime in nanoseconds: 2553639931215
last loaded kext at 2454379476491: org.emlydinesh.driver.BTFirmwareUploader    2.6 (addr 0xffffff7f821b2000, size 2834432)
last unloaded kext at 197049986957: org.hwsensors.driver.ACPISensors    1613 (addr 0xffffff7f820dd000, size 32768)
loaded kexts:
org.emlydinesh.driver.BTFirmwareUploader    2.6
org.rehabman.voodoo.driver.PS2Trackpad    1.8.13
org.rehabman.voodoo.driver.PS2Keyboard    1.8.13
com.insanelymac.RealtekRTL8111    1.2.3
com.jmicron.driver.JMB38X    1.5.0
net.osx86.kexts.GenericUSBXHCI    1.2.8d9
org.rehabman.voodoo.driver.PS2Controller    1.8.13
org.hwsensors.driver.CPUSensors    1613
org.netkas.driver.FakeSMC    1613
com.apple.driver.AppleUSBCDC    4.2.2b5
com.apple.filesystems.smbfs    3.0.0
com.apple.filesystems.msdosfs    1.10
com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AGPM    100.14.37
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.driver.ApplePolicyControl    3.7.21
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.driver.AppleMCCSControl    1.2.10
com.apple.driver.AppleOSXWatchdog    1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleIntelHD3000Graphics    10.0.0
com.apple.driver.AppleHV    1
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.iokit.SCSITaskUserClient    3.7.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.5
com.apple.driver.AppleUSBHub    705.4.1
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleAHCIPort    3.0.7
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.iokit.IOSerialFamily    11
com.apple.AppleGraphicsDeviceControl    3.7.21
com.apple.kext.triggers    1.0
com.apple.driver.AppleGraphicsControl    3.7.21
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOSurface    97
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.iokit.IOBluetoothFamily    4.3.0f10
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleSMC    3.1.9
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.driver.IOPlatformPluginFamily    5.8.0d49
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
com.apple.iokit.IOUSBMassStorageClass    3.7.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
com.apple.iokit.IONetworkingFamily    3.2
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOUSBFamily    705.4.14
com.apple.iokit.IOAHCIFamily    2.7.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    389.1
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i5, 2.49 GHz, 8 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK0/DIMM0, 4 GB, DDR3, 1333 MHz, Kingston, 99U5428-049.A00LF
Memory Module: BANK1/DIMM0, 4 GB, DDR3, 1333 MHz, Elpida, EBJ41UF8BCS0-DJ-F
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x1461), Atheros 9285: 4.0.74.0-P2P
Bluetooth: Version 4.3.0f10 14890, 3 services, 26 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en1
Serial ATA Device: Hitachi HTS547575A9E384, 750,16 GB
Serial ATA Device: hp      DVD A  DS8A8SH
USB Device: Hub
USB Device: USB Mass Storage Device
USB Device: Hub
USB Device: HP HD Webcam [Fixed]
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

this is error ive got after automatic reboot


EDIT:
Ok wifi works i press wifi button and its helped, now i havent sound and usb 3.0